Waiting with interest!!!!
Printable View
Waiting with interest!!!!
Undercoated and final rub down. A quick final wipe over and then the top coats. https://www.aulro.com/afvb/images/im...017/09/205.jpg
The planned cam pattern.
https://www.aulro.com/afvb/images/im...017/09/204.jpg
First coat, light tan.
https://www.aulro.com/afvb/images/im...017/09/248.jpg
Now that is going to look nice. Especially with the MG on the top!!!!!!
Well I had some novice dramas on Saturday. I started with a new bigger gravity gun and it just spat out lumps, took ages to get through 800ml of paint and thinners. I thought it was the gun. I persisted for about 3hrs. Then the old direct drive died. It got me through a first coat as pictured in the previous post. Today I spent a couple of hours sanding the lumps away. I hired a twin belt drive from Bunnings, wow what a lazy lump. Just chugged along. I also pulled out the new tin light tan. To see if that made a difference. It did after a bit of gun adjustment. I was a bit worried about using the cam brown and green which was similar age to the first coat, but was ok. Here's the result. Not quite to plan but time got away and had to get the compressor back.
https://www.aulro.com/afvb/images/im...017/09/317.jpghttps://www.aulro.com/afvb/images/im...017/09/318.jpg
https://www.aulro.com/afvb/images/im...017/09/319.jpg
What brand and type of paint are you using ,and what company are you getting it off?
Another pic unwrapped.
Most of the paint was Protec. The last tin was Concept Paints.
https://www.aulro.com/afvb/images/im...017/09/358.jpg
Looks good. What size nozzle on the gun? Had similar issues is all.
Tip was 1.4 I think.