-
1st April 2018, 12:14 PM
#1
Axle / cv
Hi all,
I busted an axle the other day, Just wanted to know where the best place to buy one was ?
I don't want to go the Ashcroft direction just yet , The axle housing is in bad shape welded up , so will get another housing an ATB and Ashcroft axles all at once down the track .
But just to get me by until then ?
Also how do you remove the cv joint from the axle ?
thanks
-
1st April 2018, 01:07 PM
#2
You knock the CV off the half shaft. Sometimes then can get stuck. Something a bit soft to reduce the shock from the hammer is a good idea as you can crack the CV if you hit too hard.
-
1st April 2018, 01:54 PM
#3
Thanks , I gave it a few fair whacks , I thought there might be a knack ...Well I hoped there was a knack anyway
-
1st April 2018, 02:03 PM
#4
Hold the axle in a vice and knock the inner part using a drift it helps if you have some one keep pressur on it .What spline axle?
AM
-
1st April 2018, 03:37 PM
#5
I use a long bit of pipe or scaffold tube a bit longer than the axle but of a size that bears on the cv then just drop the pipe and all end on , onto the cement floor. Knocks the CV off.
-
1st April 2018, 07:39 PM
#6
Good tips ...thank you , I will give them a go tomorrow
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks