Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Perentie heavy duty rear drive flanges

  1. #1
    Join Date
    Mar 2018
    Location
    Engadine NSW
    Posts
    7
    Total Downloaded
    0

    Perentie heavy duty rear drive flanges

    Good evening all, thinking of putting heavy duty drive flanges on a perentie. I've just returned from Vic high country and lost one of the rear plastic caps. Thought heavy duty drive flanges would be better.

    1. Anyone recommend a brand of flanges? There seem to be a few out there.
    2. Should I replace axles with heavy duty ones at the same time?

    Any help would be appreciated.


  2. #2
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,778
    Total Downloaded
    0
    I have them.

    But now in favour of using the LR part as a sacrificial component of the drive train. Keep a couple of spares flanges and circlip pliers in vehicle. Easier to change than a shaft or CV.

    Also look at making the bearings and drive flange oil fed to extend its life.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

  3. #3
    Bearman's Avatar
    Bearman is offline TopicToaster Gold Subscriber
    Join Date
    Jun 2006
    Location
    Hay Point
    Posts
    4,042
    Total Downloaded
    0
    I agree on using heavier duty axles and keeping the standard drive flanges and rubber caps. Rubber caps are cheap and last several years at least if you buy the genuine ones.
    Cheers......Brian
    1985 110 V8 County
    1998 110 Perentie GS Cargo 6X6 ARN 202516 (Brutus)

  4. #4
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    I’d go heavy duty axles and drive flanges.....my old defer never needed a sacrificial drive flange and never damaged anything upstream.

    Can think of better things to do than replace a drive flange in the side of the track.

  5. #5
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,210
    Total Downloaded
    0
    I dont think I ever saw a stripped out flange on a perentie when I was fixing them for a living,

    plenty of fried halfshafts and the odd Diff..
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    TDI D1(parting/ed)
    Tdi autoManual d1 (Kept it for the girlfriend)
    Archaeopteryx 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  6. #6
    Join Date
    Mar 2007
    Location
    Canada
    Posts
    1,011
    Total Downloaded
    0
    They don’t work as a sacrificial part. They fail from wear not from overload.

  7. #7
    Join Date
    Jun 2009
    Location
    Queensland
    Posts
    3,330
    Total Downloaded
    0
    Quote Originally Posted by rar110 View Post
    I have them.

    But now in favour of using the LR part as a sacrificial component of the drive train. Keep a couple of spares flanges and circlip pliers in vehicle. Easier to change than a shaft or CV.

    Also look at making the bearings and drive flange oil fed to extend its life.
    Thats where the screw cap flanges are good. No oil leaks.

  8. #8
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,778
    Total Downloaded
    0
    Quote Originally Posted by Red90 View Post
    They don’t work as a sacrificial part. They fail from wear not from overload.
    That’s what I meant. They wear faster than or before a HD shaft will wear.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

  9. #9
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,778
    Total Downloaded
    0
    Quote Originally Posted by 123rover50 View Post
    Thats where the screw cap flanges are good. No oil leaks.
    That’s definitely an advantage.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

  10. #10
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,778
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    I dont think I ever saw a stripped out flange on a perentie when I was fixing them for a living,

    plenty of fried halfshafts and the odd Diff..
    I bought a 300tdi diff, and when I got it Hm found a previous owner had welded the flange to the end of the shaft. Because the flange was worn. Perentie heavy duty rear drive flanges
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!