Results 1 to 2 of 2

Thread: Perentie Bull bar needed

  1. #1
    Join Date
    Jan 2014
    Location
    Kincumber, NSW
    Posts
    42
    Total Downloaded
    0

    Perentie Bull bar needed

    Hi Folks

    I have just returned from a 7000km trip in my 1988 Perentie cargo. Trying to avoid running over a big old man goanna on a muddy track in the pouring rain, I ran into a tree stump hidden by the grass. Consequently, I now have a badly damaged bull bar on the passenger side and a bit of a crumpled wing although, fortunately, all the lights still work.
    The panel work should be an easy enough fix but bull bars seem hard to find!

    If anybody has a bull bar available I would be eternally grateful to discuss acquiring it, otherwise are there any other makes of bull bar which will fit a Perentie or be easily adapted to fit. Another possibility might be to try to straighten out the existing one and try to do a bit of welding - its mainly the far left hand-section which has bent back and snapped one of the tubular sections.

    Any suggestions would be welcome. Its given me good service for 8 years now, with many long journeys, and I'd hate to lose it.

    cheers

    Trraca
    Cheers

    Mike

    Perentie GS 1988, 48-206
    Work Vehicles long ago: Series 1, several Series IIAs, FC 101 and a Haflinger
    REMLR No: 411

  2. #2
    Join Date
    Jan 2014
    Location
    Kincumber, NSW
    Posts
    42
    Total Downloaded
    0

    Bull Bar

    No problems. I have managed to find an original replacement bullbar in excellent condition and it is now installed and looking good.
    Cheers

    Mike

    Perentie GS 1988, 48-206
    Work Vehicles long ago: Series 1, several Series IIAs, FC 101 and a Haflinger
    REMLR No: 411

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!