Hi Folks
I have just returned from a 7000km trip in my 1988 Perentie cargo. Trying to avoid running over a big old man goanna on a muddy track in the pouring rain, I ran into a tree stump hidden by the grass. Consequently, I now have a badly damaged bull bar on the passenger side and a bit of a crumpled wing although, fortunately, all the lights still work.
The panel work should be an easy enough fix but bull bars seem hard to find!
If anybody has a bull bar available I would be eternally grateful to discuss acquiring it, otherwise are there any other makes of bull bar which will fit a Perentie or be easily adapted to fit. Another possibility might be to try to straighten out the existing one and try to do a bit of welding - its mainly the far left hand-section which has bent back and snapped one of the tubular sections.
Any suggestions would be welcome. Its given me good service for 8 years now, with many long journeys, and I'd hate to lose it.
cheers
Trraca
Cheers
Mike
Perentie GS 1988, 48-206
Work Vehicles long ago: Series 1, several Series IIAs, FC 101 and a Haflinger
REMLR No: 411
No problems. I have managed to find an original replacement bullbar in excellent condition and it is now installed and looking good.
Cheers
Mike
Perentie GS 1988, 48-206
Work Vehicles long ago: Series 1, several Series IIAs, FC 101 and a Haflinger
REMLR No: 411
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks