Thanks mate. Yes use a Narva double plug and 2 x 2usb outlet inserts but rough corregations can upset the apple cart. Usb hard wired sockets would be neater and would not prone to stop charging on rough roads.
Cheers
Printable View
Thanks mate. Yes use a Narva double plug and 2 x 2usb outlet inserts but rough corregations can upset the apple cart. Usb hard wired sockets would be neater and would not prone to stop charging on rough roads.
Cheers
Scott. I think I have the answer to your wishes...
And a volt meter as well...
Each circuit is 2.1a
https://www.aulro.com/afvb/images/im...016/06/185.jpg
https://www.aulro.com/afvb/images/im...016/06/186.jpg
Quote:
Originally Posted by Tombie
A link by chance??
Ask and Ye shall receive...
https://www.ebay.com.au/itm/301958991319
Thanks Tombie! In the meantime I got this https://www.anker.com/products/A2221011
2.4 amp per port
Which has the fast charge with my s7 and it does charge at warp speed. It sits nicely in the D2 and rests on the console. Probably still rattle out on corrugated roads but at least the red strip will go out and I should notice it. I didn't look into it much but there seems to be more to taking advantage of the s7 fast charge circuits than just amps. It's a heavy unit with alloy frame.
Cheers
That would nest nicely into a Carling set up as well
This is the one I'm going to use in the Defender: CAR Cigarette Lighter CUP Holder Power Adapter Spliter USB Charger Socket 2 1A | eBay
but with the cigarette plug swapped for an Anderson plug, as I now have a remote Anderson plug mounted beside the pax seat, so I can run my compressor, fridge, UHF, or anything else I can attach an Anderson plug to.
Your're chasing a 100% reversible install if I recall correctly!Quote:
Originally Posted by Avion8
It's too large for my liking. I prefer the panel mount stuff for its "discreet" size.
With technology, I can't imagine why its so damn big, or maybe it's just so it fills the cup holder :p