Results 1 to 4 of 4

Thread: Triple channel memory

  1. #1
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,032
    Total Downloaded
    0

    Triple channel memory

    My backup Pc has an INTEL board, DX58SO, this runs triple channel memory,, but the MB has 4 slots,,
    and the manual has this statement,,

    "Intel? Desktop Board DX58SO has four 240-pin DDR3 DIMM sockets arranged in three channels (A, B, and C). Channel A shares two sockets (DIMM 0 and DIMM 1) and Channels B and C have one socket each."
    and this off the website--


    • Four 240-pin Double Dataa Rate 3 (DDR3) SDRAM Dual Inline Memory Module (DIMM) connectors with gold-plated contacts arranged in two channels
    • 1600 /1333/1066 MHz DDR3 SDRAM Memory Modules
    • Three independent memory channels with interleaved mode support



    ATM filling 4 slots with the same brand and speed equals beeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeep on startup, filling 3 is good.

    NOW I seem to have 4 spare sticks of DD3 1600 ram not doing anything--

    should/can this board use all 4 sockets?
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  2. #2
    Join Date
    Apr 2016
    Location
    Melbourne
    Posts
    4,533
    Total Downloaded
    0
    Quote Originally Posted by Pedro_The_Swift View Post
    .....

    ATM filling 4 slots with the same brand and speed equals beeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeep on startup, filling 3 is good.

    NOW I seem to have 4 spare sticks of DD3 1600 ram not doing anything--

    ....
    First thing to test would be to insert one RAM module at a time on each slot.
    So start with the first, boot up hopefully works.
    On and on for each slot until you can confirm each RAM slot and RAM module works.

    Can be tedious, but "been there done that" and wouldn't want to be 'ya!

    I had a quick peek, and apparently some folks have reported problems installing 4x4Gb modules on this board too.

    One quoted fix is to try installing the RAM in this sequence:

    Install 1 each module in the first(black) and 2nd slot(blue next to black) slot.
    Boot up. get to BIOS and then power down.
    Then install your next module into slot #4(not the next in line).
    So that will leave a gap between #2 and #4.
    Boot it, into BIOS and then power down again.
    Check BIOS to make sure all ram is accounted for too.
    Then install last module into the vacant #3 slot.
    Hopefully this will get it going.

    That's about the only info I could find on it, other than it's not a board that like 4Gb RAM modules.
    Manual states 2Gb modules should be used, and to get 16Gb RAM, PCI add on cards should be used!

    Anyhow, due to the major stuff around of checking each RAM if allows POST, the second method would be quicker.

  3. #3
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,694
    Total Downloaded
    32.38 MB
    must be the weather for it..

    my pc is a gigabyte based 1366 with 6 slots for a total of 24g

    it has been giving me ram problems for a while

    last week it suddenly decided it wanted long service leave...

    after much ado it is now running again but only with 12g

    i have another cheaper gigabyte 1366 board here i was slowly building up as a backup for the accounts machine. been stable for weeks..

    till last week...

    it now only runs 12g as well but i had to get 2g x six sticks i used in the right order to get the mother to do anything other than fast beep like it was a power issue.

    /life is such fun...

    next time the big box plays up i will be looking for a laptop with 2 hdd and an ips screen

    kills productivity big time when it plays up...
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

  4. #4
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,032
    Total Downloaded
    0
    no amount of switching will make this thing boot with 4GB sticks,,,
    Threw out the psu and motherboard yesterday...
    sigh,,
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!