would acetone help?
Printable View
would acetone help?
seen a few mobs use liquid nails over the years
specially back in the days of overclocking the dx40's etc etc
just put it back before it turns to tears...
the net says isopropyl ,, might have to buy a bucket...
cant put it back,,,Quote:
Originally Posted by incisor
cpu tension lever stands upright..
cooler hits it on the way down...
so Mark.. you thought my rep was a joke??
[bigrolf][bigwhistle][bigwhistle]:soapbox::rulez::bat:
how did you get it off then?Quote:
Originally Posted by Pedro_The_Swift
as I said
"lifted" the pins out of the socket...
USUALLY the cooler just unsticks from the thermal compound and pulls off------
AAAAAAAAAAAANNND!
Just performed my very first cpu DE_LIDDING!!!!
very interesting but now scrap metal all round.
at least I know now the MB works,,[bighmmm]
chances of running across another "bulldozer" ?
just above zero I reckon
If you can lift it out you can get it back in was my point when you said the handle was in the wayQuote:
Originally Posted by Pedro_The_Swift
The cam handle doesn’t always need to be fully open for the cpu to drop in...
I'd say your CPU just failed the stress test Pete....[wink11]Quote:
Originally Posted by Pedro_The_Swift
Back to Option A,,(before the FX gigabyte came along--)
Intel MB DH55TC.
2 PWM fans, cycling on and off is the problem, no doubt operating as they should but its bloody annoying,,
Bios options are,,
any ideas for a nice constant flow?