Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: PSU stuffed?

  1. #1
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Gold Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,055
    Total Downloaded
    0

    PSU stuffed?

    Just went to boot my desktop up for the first time in 3 months or so and she’s a no go. Tries to boot for a second, then stops. Quick video shows what it’s doing - sometimes will stay on for 10 or 15 seconds.

    Am I right thinking the power supply has gone to god? There is a relay clicking inside it like a protection relay, but at 1000 watts, I’d think they’d be some smoke coming out of somewhere if there was a short like that.

    Had everything apart and cleaned it all - have everything unplugged that isn’t needed so it’s only trying to power the motherboard and CPU. I have previously unplugged the GPU as well but this made no difference.

    Just wanted a second opinion before I buy another power supply - in case it might be something I’m not seeing.

    TIA.
    Last edited by Homestar; 23rd October 2019 at 10:55 AM.
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

  2. #2
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Gold Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,055
    Total Downloaded
    0
    The plot gets thicker, and sounding more expensive. When I unplug the CPU power from the motherboard, the motherboard stays running and the PSU doesn’t trip...

    Obviously nothing else happens then. What’s the chances of a CPU or related component on the motherboard failing? Or could it be the power supply could still be toast and doesn’t have enough grunt to get the CPU away?
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

  3. #3
    Join Date
    Sep 2010
    Location
    The Hills.
    Posts
    15,786
    Total Downloaded
    0
    I don't have time to go through them now, but this guy posted a vid with something similar. It was a simple fix. Not saying yours is the same. He knows his stuff though. If you have some time have a look.

    ​JayTee

    Nullus Anxietus

    ​Getting involved in discussions is the best way to learn.

    2000 D2 TD5 Auto: Tins
    1994 D1 300TDi Manual: Dave
    1980 SIII Petrol Tray: Doris
    OKApotamus #74
    Nanocom, D2 TD5 only.

  4. #4
    Join Date
    Apr 2016
    Location
    Melbourne
    Posts
    4,203
    Total Downloaded
    0
    Quote Originally Posted by Homestar View Post
    .....

    Obviously nothing else happens then. What’s the chances of a CPU or related component on the motherboard failing? Or could it be the power supply could still be toast and doesn’t have enough grunt to get the CPU away?
    I'd say 'less likely' .. to be CPU.

    Had a quick squizz, it seems you have the ASUS X99 Pro/USB3.1 motherboard.
    If so, you have Q Code on the board.
    Helps to assess errors.
    The Q Code on your board is D0.
    Looking at the table for the X99 Pro/USB3.1 board, CPU issues should show some values in the Q code readout.
    According to ASUS, 00 error = 'not used', so what appears to be 00, must be D0(stupid segmented LEDs make it hard to decipher clearly)
    This D0 code = CPU initialization error.

    Could be that PSU has lost the ability to supply CPU power.
    The other voltage rails may be working fine, just that when the CPU draws more and more power, maybe the 3v rail in PSU has shot itself, and can't provide .. hence CPU initialization error.

    Something worth a quick look, can't do harm to try, is on the board there is a set of pins(3) marked CPU_OV. Down towards the RHS lower corner, half way between the Q code readout and the corner, and about an inch up from the lower edge.
    By default, it should be set to pins 1 and 2. If not, maybe that could be the issue(who built the PC?). If it's still set to default, maybe try to set it to overvolt, ie. set the jumper to pins 2 and 3.
    If it makes a difference(even just a single start, and shutdown event) .. then I'd say for sure PSU's CPU 3v rail is gone.

    If there was a way you could test the CPU rail power, you'd know for sure.
    That is, pull the CPU power cable, and attach a 3v load that allows you to vary the power draw to load the PSU's CPU rail more and more.

    There's a jumper trick where you can pull the PSU, use a jumper pin to get it to start off the mainboard and test the CPU rail under load.
    (can never remember the pins to jump tho).
    Arthur.

    '99 D1 300Tdi Auto
    '03 D2 Td5 Auto

  5. #5
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Gold Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,055
    Total Downloaded
    0
    Quote Originally Posted by johntins View Post
    I don't have time to go through them now, but this guy posted a vid with something similar. It was a simple fix. Not saying yours is the same. He knows his stuff though. If you have some time have a look.
    Quote Originally Posted by johntins View Post



    Thanks, but that’s not the same issue - mine won’t even bring the fans on for more than the same time anything else happens. If I got the CPU and motherboard running, I’d have half a chance.
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

  6. #6
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Gold Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,055
    Total Downloaded
    0
    Quote Originally Posted by AK83 View Post
    I'd say 'less likely' .. to be CPU.

    Had a quick squizz, it seems you have the ASUS X99 Pro/USB3.1 motherboard.
    If so, you have Q Code on the board.
    Helps to assess errors.
    The Q Code on your board is D0.
    Looking at the table for the X99 Pro/USB3.1 board, CPU issues should show some values in the Q code readout.
    According to ASUS, 00 error = 'not used', so what appears to be 00, must be D0(stupid segmented LEDs make it hard to decipher clearly)
    This D0 code = CPU initialization error.

    Could be that PSU has lost the ability to supply CPU power.
    The other voltage rails may be working fine, just that when the CPU draws more and more power, maybe the 3v rail in PSU has shot itself, and can't provide .. hence CPU initialization error.

    Something worth a quick look, can't do harm to try, is on the board there is a set of pins(3) marked CPU_OV. Down towards the RHS lower corner, half way between the Q code readout and the corner, and about an inch up from the lower edge.
    By default, it should be set to pins 1 and 2. If not, maybe that could be the issue(who built the PC?). If it's still set to default, maybe try to set it to overvolt, ie. set the jumper to pins 2 and 3.
    If it makes a difference(even just a single start, and shutdown event) .. then I'd say for sure PSU's CPU 3v rail is gone.

    If there was a way you could test the CPU rail power, you'd know for sure.
    That is, pull the CPU power cable, and attach a 3v load that allows you to vary the power draw to load the PSU's CPU rail more and more.

    There's a jumper trick where you can pull the PSU, use a jumper pin to get it to start off the mainboard and test the CPU rail under load.
    (can never remember the pins to jump tho).
    Thanks for that - Yes it’s the x99 pro board - jumper was between 1 and 2. I changed it to 2 and 3 and it powered up long enough to start windows booting - much longer than any other boot I’ve managed and I thought it was actually going to work for a second, but then failed to chooch. It did show the CPU is doing what something and the also the solid state drive that windows is on is also working. Does that confirm your 3 volt rail theory/ stuffed PSU from your point of view? Based on it trying to boot, I’m much happier knowing that the other bits seem to be working still.

    I don’t have anything I can load it with unfortunately. Oh, I built the computer some years ago, when all this stuff was considered fairly good. My Son used to use it as a gaming rig, but after that I inherited it and it now does not much apart from some occasional video editing which it works quite well doing, so if I can get it to live again, I’ll hopefully get a few more years from it.

    If it is the power supply, I’ll be a bit ticked to be honest as that was supposed to be a decent brand, and when I cleaned it out, noticed they are using Nippon Chemi-con caps, which cheap units certainly don’t use. Might be better off just getting a cheap arse one if they only last a few years like this - and it was overkill to the max - 1000 watt so it’s not like it got a flogging or anything - was on special and cheaper than the 600 watt version as it had just been superseded.
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

  7. #7
    Join Date
    May 2003
    Location
    On The Road
    Posts
    29,829
    Total Downloaded
    0
    The real late model PC's hardly need any power,, most will run happily on a 500w jobby.. buy a 2nd hand $50 dollar one and test...
    the real buying point is the CPU power connector pin number.....


    and my last spin stop issue was a bad start button.... used the reset and all good...
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  8. #8
    Join Date
    Sep 2010
    Location
    The Hills.
    Posts
    15,786
    Total Downloaded
    0
    Quote Originally Posted by Homestar View Post

    Thanks, but that’s not the same issue - mine won’t even bring the fans on for more than the same time anything else happens. If I got the CPU and motherboard running, I’d have half a chance.
    .
    Sorry, Gav. I wasn't suggesting that that vid was the same issue, I was pointing you to him because I'm sure I saw him deal with a similar one, but I couldn't tale the time to find it. He has many vids on line. However, they are long.
    ​JayTee

    Nullus Anxietus

    ​Getting involved in discussions is the best way to learn.

    2000 D2 TD5 Auto: Tins
    1994 D1 300TDi Manual: Dave
    1980 SIII Petrol Tray: Doris
    OKApotamus #74
    Nanocom, D2 TD5 only.

  9. #9
    Join Date
    Apr 2016
    Location
    Melbourne
    Posts
    4,203
    Total Downloaded
    0
    Yeah, if she runs on the boosted voltage, then it's 99.9% PSU problem.
    (still a slight chance some weird stuff happening on the CPU .. wouldn't know enough about something like that tho)

    You haven't said what peripherals you're running, but I doubt you'd need 1000W for most standard PCs.
    eg. how many HDDs do you have connected at any one time, incl USB or other externally connected.

    I'm currently on an AMD FX CPU(monster power hungry CPU), but more importantly 5 HDDs internal, and 1 USB ext plus two SSDs(one 2.5" SATA, and one M.2) .. I worked out 800W was all I really needed .. ended up with a Corsair 850W.

    Recently built son his Ryzen 7, only used a 650W PSU .. runs no worries .. just the 1Tb M.2 SSD. Silverstone 550W model .. ~ $100 (give or take 5). Fan is a little louder than I'd have liked, but son isn't fussed by it.
    If you were running dual GPUs and lots of HDDs, then yeah .. 1000W probably makes sense.

    Also: looks like yours has liquid cooling? Never used one no idea how much power they draw, and on which rail .. so may make a difference.
    Arthur.

    '99 D1 300Tdi Auto
    '03 D2 Td5 Auto

  10. #10
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Gold Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,055
    Total Downloaded
    0
    Thanks again - the liquid cooling draws bugger all and comes off the fan hub power supply I think - I had all that disconnected when testing. The liquid cooling works well and when CPU and GPU loads are low, the fans don’t even run, so it’s pretty quiet. Only time they really get going is when I’m Rendering a video.

    Have ordered a new power supply - no one within 50KM actually stocks a gaming power supply, just the cheap arse ones with leads hanging out them which are no good to me.

    Should have it Friday, so I’ll either have 2 good power supplies and a stuffed computer by then or a running computer and 1 stuffed power supply. 😁

    Half thinking about gutting it and starting again should this not work, I would go AMD this time around if I do lash out, Intel seem to have slipped quite a bit behind at the moment - would only need a new MB, CPU and GPU. Would stick an M.2 drive in as well. 👍
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!