Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: No internet on rehashed computer

  1. #21
    Join Date
    May 2009
    Location
    West Gippsland - Victoria
    Posts
    2,907
    Total Downloaded
    0
    I assume you have one of these ?

    https://dlcdnets.asus.com/pub/ASUS/m...ING_UM_WEB.pdf

    Without getting too technical, how about trying another of your 6 SATA drive connection ports ? I assume the first two are controlled by the main chipset and the other four are controlled by a separate RAID capable controller ?

    Pages 1-12 and 2-9 give a bit of info here. Double check your power and SATA cable connections as this is the most common point of failure

    If this doesn't work might have to delve into BIOS to see if basic configuration is OK. Did you give the board a BIOS reset before setting up your hardware (if a second hand pre used board). This is pretty easy to do and sets all CMOS settings back to factory default. Depending on which SATA port you're using for your second HDD this could be an issue if the configuration was (and still is) set up as a RAID arrray.

    If you need to reset CMOS follow the instructions on page 1-17. Note. the terms BIOS and CMOS are interchangeable here and refers to basic motherboard settings

    Deano
    66 SIIA SWB .......73 SIII LWB diesel wgn
    86 RR 'classic'......99 Range Rover P38a
    94 Defender 110..95 Defender 130 Ute
    96 D1 300TDi.......99 D2 TD5 (current)
    04 D2a Td5..........02 Disco 2 V8

  2. #22
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Gold Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,055
    Total Downloaded
    0
    Yes, one of those. Board is new and now I'm connected to the internet it recommended an update which I did and everything but that drive seem to be working fine now. No, I haven't done the basics and checked to make sure a plug or something has come loose, but that's about to happen. If it looks ok, I'll try another SATA port.

    Will report back.
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

  3. #23
    NavyDiver's Avatar
    NavyDiver is offline Very Very Lucky! Gold Subscriber
    Join Date
    Feb 2010
    Location
    Melbourne
    Posts
    9,359
    Total Downloaded
    0
    Quote Originally Posted by Homestar View Post
    Ok, have one more for you all - the new HDD I installed (an extra one for the camera footage) isn’t showing up. Any ideas how to make that work?

    TIA.
    SSD or SATA ones?

    Is it warm? If not check cables 3.5 Inch Desktop Hard Drives the power cable and the SATA cable are separate cables. I'd unplug while the computer was off and re plug them.


    SSD
    https://www.google.com/search?client...H4-EPt4eX-Ao16

  4. #24
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Gold Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,055
    Total Downloaded
    0
    Sata. Haven’t checked tonight, but will check tomorrow - I could have sworn it came up in the bios to start with when I first went through it but it doesn’t show there now so probably a loose connection.
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

Page 3 of 3 FirstFirst 123

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!