No probs.Quote:
Originally Posted by rfurzer
Remove intake hose to TBody, clean with carby cleaner especially around and behind where the butterfly rests. You will need to have the throttle pedal to the floor to do this.
Attempt to get a .05mm feeler guage between the butterfly plate and bore, at about 6 o'clock. If need be, adjust the stop screw under the tag on the linkage , some later ones will not be adjustable, in that case CAREFULLY bend the stop tag.
Then, with ignition on measure the voltage between red and green wires, needs to be between 0.29 and 0.32v. You will, on later models, need to slot the holes on the sensor to rotate it.
