Thread: 15 inch rims and 35-37 inch tyres- any issues???

Originally Posted by Landover

Can't wait to see the big wheels mate, should be awsome. I thought you were getting a Rangie or have plans changed.

Yeah, plans have changed Dave.

I've put a bit of money into the Disco, and I know it's good's and bad's, so it's better that I keep it and continue the mod's on it and build it up to what I want it to be.

Hoping (if the dollars stretch that far) to get lockers front and rear soon too.

Originally Posted by cockie55

I would go 16's as there will be more than enough sidewall plus some and will also give you ability/option to upgrade brake size and use internal beadlocks (tube valve stem and brake clearance).

Arn't the upgraded rotors the same diameter as standard just thicker, drilled/vented etc?
I know of people running upgraded brakes with 35's and 15'' rims

CHEERS TIM.

Just quickly hijacking the thread again.

I was thinking of these:
AT-771 Bravo Series

$200 fitted per corner. Is this the size I need for my standard 95 Disco?
LT235/75R15

Originally Posted by Wongdai

Just quickly hijacking the thread again.

I was thinking of these:
AT-771 Bravo Series

$200 fitted per corner. Is this the size I need for my standard 95 Disco?
LT235/75R15

Standard Disco tyre size is 235/70R16. You could go 235/75R16 or 245/70R16 if you want slightly larger tyres on a standard Disco or 245/75R16 if you want to trim a bit off the back guard with standard suspension.

I don't mind trimming so 245/75R16 it is!

Originally Posted by long stroke

Arn't the upgraded rotors the same diameter as standard just thicker, drilled/vented etc?
I know of people running upgraded brakes with 35's and 15'' rims

CHEERS TIM.

By upgrade I meant bigger calipers and rotors and which are essential if you running >5" diam over D1's stock 29"