Results 1 to 8 of 8

Thread: A few questions

  1. #1
    fev Guest

    A few questions

    Hi all,

    I have a few questions if anyone can help...
    1. I am trying to change the engine mounts on my 95 D1 but before I go through with it was wondering if anyone could tell me how high I need to lift the engine block, am worried of going too high and damaging something. Also, what size spanner do I need? I have removed the lower nuts but am having issues with the upper ones which I cannot see.

    2. When the engine is running, I get a whining/whistling noise either from the air box or the power steering reservoir. Any ideas?

    Thanks

  2. #2
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,155
    Total Downloaded
    0
    Basically the only thing to do is to remove the viscous fan and shroud. they are the only things that catch.
    You have to move it up about 2 inches, however I don't why they have such long threads on the mounts and you could probably cut half off each end, which would make it much easier.
    BTW, do not jack it under the sump unles you want a new TAP-TAP noise. Make up a T out of pine 1x1 or 2x1 and place it under the front flange of the sump with a jack under it.

    Regards Philip A

  3. #3
    fev Guest
    Thanks Philip,

    I had it raised a bout an inch with a large block of wood between the sump and jack. Couldn't get top bolts loose so reassembled rest. Will move jack location next time.

    Any ideas on whistling noise?

  4. #4
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,155
    Total Downloaded
    0
    When the engine is running, I get a whining/whistling noise either from the air box or the power steering reservoir. Any ideas?
    Well its hard to make any useful comment on such a wide field.
    A whistling noise could be an air leak into the manifold. you should check all vacuum pipes that go to the manifold AFTER the throttle plate. One thing to check is whether the plate that holds the IAC at the back of the plenum has come loose. Check the bolts that hold the manifold to the head and spray CRC along the join and see if it changes.

    A whining noise could be the bearing in the belt tensioner or the PS pump itself . I cannot see how the reservoir would make a noise. It could also be the water pump bearing or the alternator bearing.
    I suggest that you get a long screwdriver or better a doctor's stethoscope with the amplifier off the tube and place it on where you think the noise originates and everywhere around the place , even where you don't think the noise originates.
    Regards Philip A

  5. #5
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,505
    Total Downloaded
    0
    fractured vac line somewhere.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  6. #6
    fev Guest
    Thanks,

    I'll have an investigatory look this arvo.

    Is there anyone located on the central coast who could give me a hand and show a tinkerer around the engine bay?
    Thanks,
    Phil

  7. #7
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,155
    Total Downloaded
    0
    Phil, I live as stated at Avoca Beach, if we are referring to the same Central coast and would be happy to have a look although I am rooted in the past with a V belt RRC.
    I will PM you my phone . No go over Easter as family is coming and I would be Persona non Grata if I stuck my head under a bonnet.
    Regards Philip A

  8. #8
    fev Guest
    Hi Philip,
    I'm at forries so not far away

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!