Results 1 to 4 of 4

Thread: TM2 Engine Watchdog sensor placement

  1. #1
    Join Date
    Feb 2010
    Location
    Gold Coast
    Posts
    89
    Total Downloaded
    0

    TM2 Engine Watchdog sensor placement

    Hi guys,

    I've just purchased a TM2 Engine watchdog for my 300Tdi Disco 1.

    Would like some advise on the best location to mount the engine temperature sensor. I can't seem to find any convenient bolt to attach it to.

    Cheers
    Geoff

  2. #2
    Join Date
    Aug 2008
    Location
    Victor Harbor SA
    Posts
    293
    Total Downloaded
    0
    I found a threaded hole just underneath the thermostat housing on the front of the head. Then the next trick was to find a threaded bolt to fit. My local mechanic had heaps to try so that wasn't a problem.

    Some suggest that the front of the head is a poor location because of air circulation at speed etc affecting the reading. Not the case. It's absolutely fine, and the unit is immediately responsive to changes in conditions such as going up/down inclines.

    Cheers OMV

  3. #3
    Join Date
    Feb 2010
    Location
    Gold Coast
    Posts
    89
    Total Downloaded
    0
    Thanks OMV,

    I'll have a look first thing tomorrow.

  4. #4
    Join Date
    Feb 2010
    Location
    Gold Coast
    Posts
    89
    Total Downloaded
    0
    TM2 now successfully installed! Thanks OMV.

    For future reference, the size of the spare threaded bolt hole on the front of the head, next to the thermostat housing, is an M8.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!