you changed the injector pump or the lift pump?
check the sedimentor and the filter for blockages and blow the lines back while they are off.
hi all
i was driving the other day and my 96tdi just stopped in the middle of the road lol, when i got it home the motor turned ove but didnt fire.
so check all the fuel lines and found it wasnt getting up to the block, so i change the injecter pump turn it over to bleed but still no fuel,
what esle could be stopping the fuel from getting to the block
thanks all liam
you changed the injector pump or the lift pump?
check the sedimentor and the filter for blockages and blow the lines back while they are off.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
i change the injector pump, theres no fuel coming out of the back of the pump,there heaps of fuel goin tothe pump.
the pump i change to was working on my other dico fine
lift pump?
fuel going to and out of the lift pump, and it come out of the filter
fuel solenoid could be gone....
how long did it take you to change the IP?
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
a few hours to take off the old one and off the other car then back on
Did you check that the IP solenoid was getting power with ignition on as Dave just mentioned???
If not there is your problem right there.
JC
thanks heaps guys it was the IP solenoid had no power to it. ran new wire to it now shes running again
this happened to me the disco stopped the first journey in it to get a new battery just stopped and i pulled over to the side of the road. i knew i had been working near the rear of the pump and at the top of the oil filter so i hopped out, crossed my fingers and had a look and bingo the wire was off the solenoid, plug it back in and away we went with a great sigh of relief.
always try the easy stuff first!!
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks