Tailgate dramas

if by "take it to a fabricator" you mean "chuck it on my workbench on top of a sheet of ally checker plate" and by "make this" you mean "mark it out with a permanent marker then cut it out with a jig saw and debur it with a lapping disc on a grinder"

then yes, thats exactly what I did.

Quote:

---

Originally Posted by Landover

The easiest thing to do is take it off. I took mine off to do some work in the door and found by leaving it off it gave you plenty of places to store bit and pieces. I was going to put a drop down table but did not get around to it.

---

Have done exactly the same. I had to remove mine to fit the fridge slide. I have plans of making a drop down table.I will get around to it one day. The photo was taken in 2009. I use the door cavity to store spare belts, D shackles, tow ball cover when towing, gloves and rags and a few other objects.

http://img528.imageshack.us/img528/453/img3873mn.jpg

how are the cheqer plates fitted to the door?