The same thing happened to me. The CDL and Hi/Lo are two completely separate things. I traced it back down the linkages and found the issue inside the Transfer case. The selector shaft moves back and forth with no resistance. I have pulled the Transfer out as the car is no longer on the road but have not had time to pull it down to investigate. My theory is the "Set Screw" has come loose or sheered of at the selector fork. Either way the box has to come out. Pull the centre console and check the linkage first. If you remove it from the Transfer selector and still moves freely it's inside you box.
Cheers, David.
My Land Rover has made me a better Mechanic........
D2 TD5 Manual, CDL, Detroit Rear, Truetac Front, 2" OME lift, 32" MT Tyres, ARB Bull Bar, Winch, TJM Roof Rack, Driving Lights, Dual Batteries, ARB Side Steps, Rear Draws, Uhf.
cdl issues
Reply With Quote
Bookmarks