Printable View
Ok so after following all the instructions from another post which I assume are similar if not the same as the rave diagnostics the only issue I found was that when I spun the rear wheel and checked the voltage at the cruise ecu it was about 10volts when it is meant to be Below 5volts. Does anyone know if this means the ecu is the issue or not? Every other test was fine..
Hi All
Just had my D1 v8 to the Toowoomba Land Rover dealership to fix my central locking. They did a splendid job and it now works superbly.
While there, I asked them to check over the cruise control to see if it was an easy fix. Sad to report it is not good, with six pencils stick up the vacuum hoses and random pieces of string stuck in various orifii (?)
I conceded defeat on the cruise control but may revisit it again when I can work out why the pencils were there.....:(
So I know this is from a while ago but I still haven't figured out the problem. I've followed a guide for diagnostics and it was either the ecu or the speed sensor. I've replaced the ecu with one that was apparently tested and working but it didn't fix it. Anyone know where the speed sensor is?
Ive decided to put the whole car in the too hard basket and as such putting it up for sale. I Havent driven the thing since november and i got my car back