D1 Dash Screws what size?

Quote:

---

Originally Posted by Debacle

Are you talking about the drop down access panel for the fuse box ?

https://www.aulro.com/afvb/images/im...14/05/1291.jpg
https://www.aulro.com/afvb/images/im...14/05/1292.jpg

If so, Microcat doesn't list them separately and I doubt if you will get them secondhand by themselves, you might have to get the whole panel.

Or are you talking about these
https://www.aulro.com/afvb/images/im...14/05/1293.jpg
https://www.aulro.com/afvb/images/im...14/05/1294.jpg

They are 7mm head, 5mm thread 15mm thread length.

---

"the 2 dash screws located JUST IN FRONT of the steering column" but thanks anyway for the effort.

They hold the binacle surround down or the column shroud on?

Quote:

---

Originally Posted by SLOWBOAT

I did ask the whole question you just did not read it correctly. I asked what the CORRECT SIZE was not what I can just botch in.

---

No need to get angry and start shouting. A few of us here have tried to help, and most still don't even know what two screws you are even talking about. I read it correctly, there was just not enough information in the question.

As I previously stated, you did mention trial and error, which suggested you needed a fix - not a concours replacement. Most of us have to find something else that works as the plastic is well past its best by date. You seem to be lucky with the condition of your plastic.

You mentioned also a correct size, and whether it is #6, 7, 8 or whatever, within that size there are a great number of options for screw head styles and screw pitch. You don't just need CORRECT SIZE of screw, you also need type.

Again, good luck with your search.