Thread: Identifying disused electrical terminals

No levelling option on a D1.

It's not cruise control?

Sent from my GT-I9305T using AULRO mobile app

Originally Posted by benji

It's not cruise control?

Sent from my GT-I9305T using AULRO mobile app

Not near the lights it wont be, probably fog lights or heated washers or something like that.

Vac Pump for the cruise is just below left headlight

Most likely fog lights.
Wiring for them is standard, switch is on the binacle, left side.
Lights themselves were an optional extra of course.

Thanks for the help guys. I'm now confident its head light leveling and fog lights.
Any one know if the fog lights will be wired to a blank switch location if not factory fitted option

Also how do I thank someone for the help/post.

Originally Posted by gware

Thanks for the help guys. I'm now confident its head light leveling and fog lights.
Any one know if the fog lights will be wired to a blank switch location if not factory fitted option

Also how do I thank someone for the help/post.

To the right of the box, the Person has written in. There is a Thanks Button on the far right. Next to the quote button.

Originally Posted by gware

Thanks for the help guys. I'm now confident its head light leveling and fog lights.
Any one know if the fog lights will be wired to a blank switch location if not factory fitted option

Also how do I thank someone for the help/post.

If you are confident that they are plugs for the Fog Lights, then more often than not, the other end of the loom will have the plug for the switch.
It will be partially taped to the rest of the loom, up near where the switch would normally be.
OR, the loom for the lights may go to the Relay under the dash, and you may need the loom from Relay to dash switch. But my money is on the loom being complete right upto where the switch would be.