Thread: What did you do with or to your Disco today

Went out for a play in wallaroo state Forrest at 11pm with some guys from work had a bit of fun only damage a busted indicator lenses ....damn tube bar no upper protection

Sent from my HTC_0P6B using AULRO mobile app

Originally Posted by loanrangie

Replaced the broken bonnet release cable so now i dont need to use pliers to open the bonnet, and Railey dropped in and we fixed his last remaining RWC issues by fixing the rear door external handle and drilled out and replaced a snapped seat base bolt.

And that was awesome man! Thanks again!!!


Sent from my iPhone using AULRO mobile app

Pulled out the radiator and intercooler from the Disco I just purchased. Notice last week they looked a bit dirty.





So gave them a good clean out, flushed the cooling system, and did and oil change. Now to make sure I've bled the cooling system and take it for a bit of a play/fish down at the river tomorrow

Put the front back on the engine for the 2nd time. Did the timing belt & tensioners a few weeks ago & fitted a new crank gear & seal. The seal leaked so had to pull it all apart again.

Finally put in a new Sony stereo so that I can play the music on the iphone through it. When I took the old CD stacker out from under the drivers seat I remembered I had left some CD's in it - now I need to work out how to get them out?

In the last few days, to make space for a dual battery have installed a snorkel, relocated power steering reservoir and relocated and replaced coil with a bosch mec717 onto the lhs inner guard and installed a battery tray. If I get time in the next couple of days might install the scorcher dizzy I've had laying around.

My list is getting shorter, but it's a long list.

Originally Posted by toad

Took the 2door, 3 cyl, 300 tdi I brought for 3 cons of beer, diagnosed a broken rocker shaft. Replaced with parts from a dead engine, all cyl have come home! Fixed the electric widow on the drivers side, and while I was there lubed up the central locking bits and now that works.

Fitted a second hand bull bar and snorkel to replace the missing ones when I got the car. Had to pay for four tyres...... One wheel bearing and seal and the dash to go.

Any advice on how the replace a D1 dash?

Not a bad days work. I'd say have a beer now

I fitted a magnum winch with steel cable. Even though I have heavy duty king springs all round the nose has dropped a bit