Also interested in anyone running their cvs in 80w90
Sent from my SM-G900I using AULRO mobile app
Printable View
Also interested in anyone running their cvs in 80w90
Sent from my SM-G900I using AULRO mobile app
You can run 80/90 oil but you need the rtc3511 seal at the back of the hub to contain the oil.
Cool this is the seal I'm using. Nothing like posting as I'm going. Hopefully photo works, first time putting photo on the forum. I will look later on how to post photos.
Cheers Woosha
That's the seal, you will be good to go.
when you tighten up the bolts for the retainer plate the seal tightens up to "just so" you should be able to slide a plastic feeler gauge under the lip and move it around without it snagging.
I advise doing the swivel preload before you mount the swivel seal.
If you're doing the oil conversion, and you want the bearings to run oil as well dont forget to omit the seal for the hub. so it can get from the swivel housing to the bearings. although thats more applicable for the rear axle than anything else.
you will also want to sort the drive axle caps.