-
The caliper is held on by 2 bolts. you undo them and hold the caliper up with wire.
The axle on these is different to RRC , but AFAIR there is a cap which you undo and you can pull the axle out. Just make sure you have enough room to the side to pull the axle out.
This video explains fully the actual process of replacing the bearing.
[ame]https://www.youtube.com/watch?v=ZtbQFAftCV8[/ame]
Regards Philip A
There are 2 seals , one separating the diff ferom the hub, and one keeping grease in and dirt out.
-
And you won't need any puller's , just drifts to knock out the races.
Sent from my K4000_PRO using AULRO mobile app
