You want some 8.8 high tensile bolts.
recovery.jpg
recovery2.jpg
Fitting these recovery points to the front chassis bar, have a TJM classic 15 front bar already fitted, has anyone had experience fitting these and if so what bolts did you use?
Thanks
Arty
You want some 8.8 high tensile bolts.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
Thanks Loanrangie, was also after the actual M size of bolt as I have read the bar requires some movement is this the same for the recovery points
just watched
YouTube
they mention at 4:46 the size of M10 120, they don't have the steering guard fitted nor the extra width of the recovery point, having at look at the bolts and they aren't anywhere near as big as I anticipated for such a load
Nuts and Bolts Distributor Australia Wide. Order Online Today - Boltmasters Pty Ltd
Little bit pricey for a bolt but if these are ones allowing for the extra 12 mm of recovery point the upper attachment of steering protector, so went to ebay pack of 5 at $15 from Brisbane, harder to find over the 120 length though.
So will put this job off till later!!!
Usually 13mm.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
Please go to a proper bolt shop....
"How long since you've visited The Good Oil?"
'93 V8 Rossi
'97 to '07. sold.
'01 V8 D2
'06 to 10. written off.
'03 4.6 V8 HSE D2a with Tornado ECM
'10 to '21
'16.5 RRS SDV8
'21 to Infinity and Beyond!
1988 Isuzu Bus. V10 15L NA Diesel
Home is where you park it..
[IMG][/IMG]
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks