anyone with ideas &/or suggestions?
Hey Guys...
Just wondering if the same issue that been talked about with the rear windows not being able to go Up/down due to a dry solder joint on the PC board would also effect the Drivers Window from not raising/lowering?
I've replaced the switch with a spare I had but it is again playing up, so I'm thinking it might be again related to the PC board ??
Ideas/suggestions ??
anyone with ideas &/or suggestions?
Do you know if the spare is ok? Have you swapped a known good one to test? I have had faulty brand new parts in the past.
Have you cleaned the connectors and checked the earth?
54 Series 1 86
61 Series 2 109 - Club Rego
76 2 Door Range Rover
78 101 Forward Control - Club Rego
88 Perentie FFR - Club Rego
90 4 Door Range Rover - Club Rego
93 Discovery 1 200 Tdi - Club Rego
98 Freelander 1 - Full Rego
22 Defedner 90 - Full rego
They get a dry solder on the circuit board. Either replace or remove and repair. There will be a how to on here or on the web. Mine has had this problem.
1996 Disco 1 300TDI manual - Lucille a cantankerous red head! :D
1997 Disco 1 300TDI Auto - sold
JayTee
Nullus Anxietus
Getting involved in discussions is the best way to learn.
2000 D2 TD5 Auto: Tins
1994 D1 300TDi Manual: Dave
1980 SIII Petrol Tray: Doris
OKApotamus #74
Nanocom, D2 TD5 only.
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks