Just had a quick peek through RAVE(do you have it?)
Under the body section there is a heading listed as grab handles, it shows two rectangular washers between the grab handle and the body mount/threads.
Hey all,
Pulled apart my headlining a long time ago and am now just putting it back together. I'm having issues re-installing the grab handles and believe I am missing parts relating to the way in which they mount. I have the right screws and obviously the grab handles but the white plastic mount that is attached to the roof is too wide for the screws and doesn't have a thread. I suspect there's an insert maybe but I can't find any reference to one.
Attached is a photo of said mount.
Thanks in advance
20210817_162313.jpg
Just had a quick peek through RAVE(do you have it?)
Under the body section there is a heading listed as grab handles, it shows two rectangular washers between the grab handle and the body mount/threads.
Arthur.
'99 D1 300Tdi Auto
'03 D2 Td5 Auto
Cheers for getting back to me mate. I don't have a RAVE manual sadly but managed to track down a workshop manual from it and discovered that the bolts I was supposed to be using for the grab handles I had installed in the front headlining pocket mounts
So I've now solved that but now I don't know what screws/bolts go into the front headlining pocket mounts. This I can't seem to find referenced on the workshop manual this time.
Do you know of anyone selling access to the RAVE manual still? It's probably been asked before but all the links I find don't seem to work anymore.
Cheers for your help mate,
Howgood
And just like that I have found a diagram/parts list for the entire headliner. Thanks again for the help!
Just in case someone makes the same mistake of not filing parts like myself, I've included said list's link below:
https://parts.jaguarlandroverclassic...nd/land-rover/
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks