Results 1 to 4 of 4

Thread: 98 Disco 1 ABS Relay

  1. #1
    Join Date
    Apr 2022
    Location
    Perth
    Posts
    6
    Total Downloaded
    0

    98 Disco 1 ABS Relay

    IMG_5354.jpgIMG_5356.jpg Hi all I am trying to diagnose my ABS problem on my 98 Disco1 and have a two part question that I'm hoping some knowledgeable person on this forum will be able to answer
    1/. does anyone know which relay in the attached photo's is the ABS relay unfortunately I don't have a wiring diagram ( the manual I purchased doesn't have them )

    2/. Does anyone know what the blue relay base is for ? I'm hoping its just for an option my vehicle doesn't have

  2. #2
    Join Date
    Dec 2020
    Location
    Otago, NZ.
    Posts
    64
    Total Downloaded
    0
    Quote Originally Posted by brucemahony View Post
    IMG_5354.jpgIMG_5356.jpg Hi all I am trying to diagnose my ABS problem on my 98 Disco1 and have a two part question that I'm hoping some knowledgeable person on this forum will be able to answer
    1/. does anyone know which relay in the attached photo's is the ABS relay unfortunately I don't have a wiring diagram ( the manual I purchased doesn't have them )

    2/. Does anyone know what the blue relay base is for ? I'm hoping its just for an option my vehicle doesn't have
    Haynes number 3016 (d1 '89-'98):

    Relay locations p13.3
    Diagram 16 p13.42

    Briefly they describe 3 abs relays: pump,load,warning. All located "behind passsenger side of facia, on bracket"

    If this is what you're referring to then you might find Haynes worth looking at.

    Diagrams aren't my thing but it does list the wire colours for each of 4 wires x 3 relays so I guess that might help id.

    :-)

  3. #3
    Join Date
    Apr 2016
    Location
    Melbourne
    Posts
    4,203
    Total Downloaded
    0
    Looking at RAVE, I'd guess the black relay is the ABS Pump relay.
    Wires in and out of it should be (colour listing is always main colour and tracer colour) Brown-Orange 3.0mm, Brown-Red 3.0mm, White-Orange 1.0mm, and Black 1.0mm.
    Can see the hidden wire is brown and something .. and if the tracer colour is red then this should be it.

    The yellow relay that is the lowest in the pic looks to be the ABS Load relay, going by the wire colours and sizes .. Brown Pink 3.0, Orange Pink 3.0, black green 1.0 and black 1.0.

    The green relay appears to be the ABS Warning relay, assuming that the wire colours are indeed, black 1.0 x 2 brown pink 1.0, and black grey 1.0.

    Can't make out all the colours of the empty relay connector. What location and what colours are they all. Can see thick Brown-Orange, thin black, blue(and any tracer colour)? and the Brown and purple wires. Is there another wire.
    Arthur.

    '99 D1 300Tdi Auto
    '03 D2 Td5 Auto

  4. #4
    Join Date
    Apr 2022
    Location
    Perth
    Posts
    6
    Total Downloaded
    0

    98 disco 1 ABS Relay

    Thanks for the replies I have worked it out and read my flash codes RHS front sensor OPEN CIRCUIT and LHS front sensor AIR GAP after looking down there I will now reseal and set bearings on my swivel hubs and replace RHS sensor

    Just for everyone's information the relay to be removed to gain the flash codes is

    K103 ABS Warning Relay ; this relay has 2 Black wires 1 Black and Grey wire and 1 Brown and Pink wire

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!