Results 1 to 3 of 3

Thread: Alternator & Tow Bar

  1. #1
    Join Date
    May 2022
    Location
    Sydney
    Posts
    1
    Total Downloaded
    0

    Alternator & Tow Bar

    Hello,

    The alternator and battery were recently changed on my D1 V8i (1997) - Everything electrical was fine until this change.

    Randomly I've lost central locking, cig lighter, radio and interior lights (although these working when the engine runs). Everything else electrical seems to be working.

    I've checked fuses and all seem to be good - but not yet checked the earth.

    Is there anything else I should look for?

    On a positive the engine is now running 500 revs less and much much smoother.

    On another note, the jockey that I bought this from seems to have cut the electrics for the tow bar - I noticed, only recently, that the wiring had been balled and tied onto the frame. Is it easy to have this replaced? Or is it a more complex fix?

    any help/advice/pointers would be great.

    Thanks

  2. #2
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    13,694
    Total Downloaded
    0
    Thats interesting. My D1 V8 has a high output alternator (I cant recall the amps), but it has the tacho at 800-1000rpm higher than what it should be.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

  3. #3
    Join Date
    Feb 2020
    Location
    Perth. Western Australia
    Posts
    172
    Total Downloaded
    0
    My Disco (98 v8) did similar thing randomly, twice in 2 years. No central locking, no radio, no interior lights, no indicators etc.
    Started and ran fine with headlights working.

    After many, many hours pulling hair out, finding nothing wrong, I decided to swap battery from other vehicle. All worked.
    Noticed that the battery clamps were a bit corroded and gave them a good clean.

    That was the issue, cleaned posts on old battery and refitted, problem solved.
    My experience was always, dodgy battery connections = no start, but it did, some one suggested it may be more a case of
    disconnecting battery to reboot ECU. No idea really, but it worked.

    I hope yours is as simple.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!