Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Is the center of the dashboard on a D1 the same as a D2?

  1. #11
    Join Date
    Sep 2010
    Location
    The Hills.
    Posts
    15,642
    Total Downloaded
    0
    There are a number of units that have screens that can sit upwards of the unit. I've looked at a few. Sony probably would be my choice but they are way more expensive than the one mentioned here. But, I need  CarPlay. Ali have heaps of Android ones.

    XAV-AX8000 Bluetooth(R) Car Stereo with an Oversized Display | Sony LR
    ​JayTee

    Nullus Anxietus

    ​Getting involved in discussions is the best way to learn.

    2000 D2 TD5 Auto: Tins
    1994 D1 300TDi Manual: Dave
    1980 SIII Petrol Tray: Doris
    OKApotamus #74
    Nanocom, D2 TD5 only.

  2. #12
    Join Date
    Nov 2022
    Location
    Brisbane, Australia
    Posts
    3
    Total Downloaded
    0
    Quote Originally Posted by AK83 View Post
    Like Slunnie said, if the display unit can be spaced out from the main body unit, it can fit.
    On the D1/D2 dash, the radio unit is recessed into the fascia, about 10mm at the top and tapering to about 30mm at the lower side, so it's angled.
    Look at the dimensions of the android unit, it shows a 20mm spacing of the display relative to the main body .. so for sure it's not enough in a std fitment.
    So the display will need to spaced out more(than their hardware will allow) for the sake of the bottom edge, OR, the main body will need to protrude out of the fascia by an appropriate amount for the screen to not clash with the fascia at the lower edge.

    I found a photo of the unit installed in a D2 and it looks flush, is the taper the same on both cars or is it different?

    https://twitter.com/summerliu1025/st...94295565062146

  3. #13
    Join Date
    Apr 2016
    Location
    Melbourne
    Posts
    4,200
    Total Downloaded
    0
    Quote Originally Posted by TomSkerl View Post
    I found a photo of the unit installed in a D2 and it looks flush, is the taper the same on both cars or is it different?

    https://twitter.com/summerliu1025/st...94295565062146
    This looks good!
    It will install the same way in a D1.
    Arthur.

    '99 D1 300Tdi Auto
    '03 D2 Td5 Auto

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!