Thread: Is the center of the dashboard on a D1 the same as a D2?

Originally Posted by AK83

Like Slunnie said, if the display unit can be spaced out from the main body unit, it can fit.
On the D1/D2 dash, the radio unit is recessed into the fascia, about 10mm at the top and tapering to about 30mm at the lower side, so it's angled.
Look at the dimensions of the android unit, it shows a 20mm spacing of the display relative to the main body .. so for sure it's not enough in a std fitment.
So the display will need to spaced out more(than their hardware will allow) for the sake of the bottom edge, OR, the main body will need to protrude out of the fascia by an appropriate amount for the screen to not clash with the fascia at the lower edge.

I found a photo of the unit installed in a D2 and it looks flush, is the taper the same on both cars or is it different?

https://twitter.com/summerliu1025/st...94295565062146