Printable View
Gary, this is not a problem, will look like:Quote:
Originally Posted by Gary S11
Extreme 4x4 Ltd DISCOVERY 1,2 & RANGE ROVER CLASSIC ROCK & TREE SLIDERS
Extreme 4x4 Ltd DISCOVERY 1,2 & RANGE ROVER CLASSIC ROCK SLIDERS
If you put wheel arches them first then the production of rock sliders.:)
Hi All,
Thought i better post a Picture of my Discovery
1993, 3.5tl v8
2" lift
Cranked Trailing Arms
235x85R16 Maxxis Mudders
ARB non winch bar
Plan to lift it another inch or so, replace the Non winch bar with one to house a winch,
still a few things to do/fix but isnt there always
Attachment 60283
1996 300TDI ES
2'' old man emu lift coil spacer to level out the front (i hate the droop)
12000lb Tigerz11 winch,TJM rear bar,TJM side steps,TJM winch bar,dislocation cones, -2''shock turrets,extended brake lines,245/75R16 deestone mud claw tires,safari snorkel,cb/uhf,elec trailer brake pack,
Duplicate post***
^ Looks good!
I wish mine still looked as nice, clean and shiny as that!
Yeah I struck it pretty lucky to be honest it was covered in batscat when I got it and had been in the sun for ages but everything was straight, no scratches or damage so it just took some heavy buffing.
Happy days and thank you :-)
This is my Disco TDI 1997. I bought it from Japan in 8 months ago. It was stock when I bought it and it's still somewhat stock. http://www.aulro.com/afvb/attachment...mper-done1.jpg
Here is the list:
Interior:
JBL 5.5" speakers front (cut larger holes in the door, and its somehow fits)
JBL 6x9" speakers rear (custom mount needed to be made for this)
New boots for shifters and hand breake
Painted console
New headliner
Lot of sound insulation (the sticky rubber with foil) from RAAMaudio - Automotive sound deadening products, it makes a huge difference. I have in the footwells, doors. Still need to do under the front seats,
back seat, rear wheel wells (inside), and 2nd row floor.
Rotopax storage box Fuel Cans : Gas Pack : Gasoline Containers : RotopaX.com (I think I will do rear door checker plate and instal this along with a folding table and fire extinguisher)
New custom carpets for front and 2nd row
Window tint
220V inverter
http://www.aulro.com/afvb/attachment...umper-done.jpg
Exterior:
Front bumper is custom and it has LEDs and painted grill (here is the link for full writeup)http://www.aulro.com/afvb/discovery-...isco-leds.html
Rear bumper is painted black metallic
Skid plate, custom
Roofrack also custom (link to more pictures)http://www.aulro.com/afvb/discovery-...half-rack.html
Clear turn indicators
Custom bar for Hella lights
Hella lights
Maintenance and repair: (first 5 months of ownership at 100k km)
Replaced timing belt (just in case)
Tested the engine compression (after thermostat failure if you wan tot read the story http://www.aulro.com/afvb/discovery-...me-i-hope.html)
Replaced all suspension bushings, and tie rods.
Replaced original shocks with Terrafirma, but I wasn't happy so went to KONI Heavy tracks and they are great.
Replaced alternator (jumpy tacho, but it didn't help)
Adjusted swivel pin
Topped up the AC.
Parts in the garage (sitting and waiting):
Superwinch 9500
Mantec snorkel
I don't know when I am going to install it, but I have it :)
Terrafirma blue turbo hoses (can't install as this is Japanese version and has all kinds of extra stuff there)
Full head gasket kit, with bolts and everything (just in case)
Water pump (just in case)
http://www.aulro.com/afvb/attachment...mper-done2.jpg
FUTURE PROJECTS:
Rear door checker plate, drop down table
Boost wheels (still debating that.
Any other ideas anyone?? (just don't sugest a lift, I am not doing that :)
My '95 TDi Disco.
- 3" flexi coils
- 5" longf travel shocks
- 33" Federal Couragias
- lots more (but much, much more to come!)
https://www.aulro.com/afvb/images/im...013/05/391.jpg
https://www.aulro.com/afvb/images/im...013/05/392.jpg
https://www.aulro.com/afvb/images/im...013/05/393.jpg
It's not extreme but it holds the coffee and cake on my Discovery 1
