Super clean. Time to get it dirty?
Sent from my GT-P5210 using AULRO mobile app
Printable View
Super clean. Time to get it dirty?
Sent from my GT-P5210 using AULRO mobile app
My '93 V8 D1 auto.
Already done -
Tube winch bar and 9000lb Premier winch with dash controls
Hella spotties (HID)
Ebay 120w LED light bar
Aux battery with VSR
2" lifted King rear springs, LR green springs in the front
UHF
Home made roof rack (now lowered a bit with modified mounts since pic)
Bosch/BIM024 module upgrade
31x10.5 Kumho muddies on sunny's or 245/70-16 Mickey Thompson STZ's on std rims.
40L Engel
Aux power and lights in rear
Aux engine and trans temp gauges
Currently doing in prep for upcoming Uluru trip -
Removed rear seats
Mid mount load guard (modified of unknown make or fitment). Done
Rear internal shelf (roof). In process, tomorrow
Roof rack mounts for gas bottle, 2 x 20L jerrys and 2 x 10L waters containers. Mostly done, finish tomorrow
Do something with std exhaust (maybe delete mid muffler and run with 2 x resonators???)
Wire up reverse LED light. Tomorrow
Rear seat area storage for 3 x 20L water jerry's and other stuff....maybe tomorrow
This is Disco Sally, my 95 V8. Bought her a couple of months ago and slowly getting her sorted.
Mods so far:
Rebuilt steering box
New a frame ball joint
Lots of degreasing
Terra Firmer med duty springs and shocks +2"
Terra Firmer rear cranked arms
Castor corrected front bushes
Hankook DynaPro MT 245/75/16
Brush Bar from the wreckers stripped to metal, welded on wire mesh and resprayed
Safari snorkel
couple of led spotlights
reversing camera
Mods to come:
Number plates and rego sticker
Black out bonnet and roof with matt plastidip
Roof mounted Led light bar
Fabricate roof half rack, sliders, steering and tank guard
Diff guards
FN Loud Air Horn
Reversing flood lights
Spare wheel mounted Hi Lift Jack
Winch bar and winch
Recovery points
UHF
Rear Door storage
Cargo Barrier
Extractors an decent exhaust
Booster seats for the kids
Attachment 95519Attachment 95520Attachment 95521
You won't get a rego sticker as they no longer exist.
Why not use the bull bar off the blue disco, easy to modify to fit a winch.
Rego sticker gotta be worth a few HP Neale :D.Quote:
Originally Posted by Corgie Carrier
Partly non airbag to airbag issue, mostly cause I'll be selling the blue one in about a week. Nice to know though, I've never owned a 4wd before so my knowledge of fitting winches is non existent.Quote:
Originally Posted by Corgie Carrier
Pretty simple to do, only 4 bolts and some wires :DQuote:
Originally Posted by DogzBallz
This is the best place to ask for advice before you have a go. I have learnt so much over the time I have been on here.
Fitted the six LED Great White light bar off my now sold BT50 work ute to the roof rack, wired to high beam with wiring kit. Also fitted a small awning to the rear to complement the side one:D
https://www.aulro.com/afvb/images/im...015/06/120.jpg
https://www.aulro.com/afvb/images/im...015/06/121.jpg
Longer light bar on the Xrox bar I fitted two weeks ago, wired to the aux battery via a switch for offroad use after dark:cool:
Still need to sort cargo area and make a drop down table for the gas bbq. Considering removing the passengers side rear seat to make a base for a 12V fridge.
Some pics from Toolangi a few weeks ago.
I've done this, works quite well.Quote:
Originally Posted by WillsTdi
This isn't the best pic, but you can see the fridge past the cargo barrier.
I made a U-bar arrangement that is similar to the tube on the seat base and uses the same fixing points on the floor. I bolted a 15mm plywood table onto this U-bar, the other end of which fixes to the cargo barrier.
The fridge lashes to the front of the table and to the cargo barrier at the rear.
https://www.aulro.com/afvb/images/im...015/07/601.jpg
