Immobiliser/spider/alarm?

Quote:

---

Originally Posted by mud13s

Just read the post again,

For connector C274 pin 1 goes to the indicators (one side didn't write down which), and pin 2 goes to the central locking??

Well... that's what I figured out last night, I could be wrong!

---

Hmmmm... that doesn't sound right. Hold fire !
As I said I'm only going off an old post of Langy's - he could be wrong of course. ;)

Let me see if I can work out the Rave wiring.

This may help. They show the pin outs for the 10AS module & Bosch EDC
https://www.blackbox-solutions.com/shop/help/SM031.html
https://www.blackbox-solutions.com/shop/help/SM007.html

Best I can work out from Rave ( and the pinouts from the post above verify it ) is that pin 10 on C274 ( which is the smaller 12 pin green socket ) - the ground for the starter solenoid appears to run through that. All I can suggest is you ( maybe ) try to ground the wire that goes to pin 10 ( should be Brown Orange wire ) and see if the car will start. No warranty expressed or implied however :D

Let us know how you get on !

I've figured it out, alarm gone and she runs.

Details are downstairs I will post them later, once finished tidying up the other wiring that's everywhere

Cool - let us know how you did it - I'm going to keep details in the car.

C274 Pin 10+11 Join
C225 Pin 14 to ground (I joined it to C274 Pin 10+11)

I don't know if it will work without the spider plug in.

Got aftermarket central locking so can't say how factory central locking is affected.

hi guys
98 disco 1
i pulled the radio out this afternoon looking for the "spider" and its not there so it must be behind the glovebox (according to everything else iv been reading) so can someone tell me if its in this pic and point me in the direction so i can fix it before it costs me a divorce please

Hi, no pic visible

Tom.

Quote:

---

Originally Posted by GIC ENG

hi guys
98 disco 1
i pulled the radio out this afternoon looking for the "spider" and its not there so it must be behind the glovebox (according to everything else iv been reading) so can someone tell me if its in this pic and point me in the direction so i can fix it before it costs me a divorce please

---

There is no spider unit in 97/98 D1's ,the immobiliser is integrated into the alarm module.

Sent from my K4000_PRO using AULRO mobile app

sorry Tom try this
Attachment 113640
there is a Alarm screwed through the fusebox cover
i will try and get a pic sometime over the weekend