Power steering reservoir Bracket extention

Quote:

---

I assume you didn't have to recate the Power steering Resovior to get that batt in? do have the specs on the battery , Dimensions W/L/H etc ?

The Haze Gel 110a/h I'm interested in , is 300mm but the Power steering pump had to be relocated to get this in ?

---

Haze gel won't fit it's to high, i know cause i've tried it's 30mm higher at the top of the terminals than a normal N70, we fit them at work and i would have liked to run one. Yes the resovior had to move not much though only about 50mm out from where it was. The Battery in the Fenders is the same as a D2 it's fully sealed maintenece free and very grunty, can't really think of a better battery to use given what else will fit.
I will try to put up a picture but i've got to learn how first.

Quote:

---

Originally Posted by Wortho

Haze gel won't fit it's to high, i know cause i've tried it's 30mm higher at the top of the terminals than a normal N70, we fit them at work and i would have liked to run one. Yes the resovior had to move not much though only about 50mm out from where it was. The Battery in the Fenders is the same as a D2 it's fully sealed maintenece free and very grunty, can't really think of a better battery to use given what else will fit.
I will try to put up a picture but i've got to learn how first.

---

1) Upload your Pics to the Gallery here first , res no bigger that 800x600
2) once loaded into the gallery click on image and enlarge it
3) Right Mouse Click on Image and Left Click on Properties
4) once in Properties highlight the Location of Image and copy it
5) once copied location of image up then use "edit " when editing see a picture of a closed envelop with a mountain on it Left Click on it, this is where you paste the location of your image in gallery , that's how I paste images and was shown here.

http://www.solarshop.com.au/main/images/n70gel.jpg

I'm trying to fit a N70ZZ in my second battery tray, moving the reservoir won't be a problem, but the SRS sensor will. Anyone got ideas for how to circumvent this issue? I had a thought about building a pine cradle in the bottom of the tray to just raise the battery above the sensor (battery height needs to be measured next ;) )
Also how safe it is to unplug or move the sensor? :eek: