Steve
My Disco has the same issue with the fuel filler hose. Is this a common thing for older Disco's or for diesel ones in particular? Watching for any responses as well.
Cheers
Goldey
Noticed on the weekend that the hose between the fuel filler neck and the tank is cracked near the clamps.
Not leaking as yet but I'd like to replace it.
Just been quoted $68 from local dealer for genuine part, but it looks pretty much like a straight piece of hose to me.
Is there something special about it, or can I just use a piece of fuel grade hose of the correct diameter?
SteveG
Steve
My Disco has the same issue with the fuel filler hose. Is this a common thing for older Disco's or for diesel ones in particular? Watching for any responses as well.
Cheers
Goldey
Just arrived: 2012 D4 3.0 HSE, the journey begins again ;-).
Gone: 98 Disco 300tdi Auto, and some extras
I threw the calipers on it this morning before I left home and it measured at about 54mm - outside diam of filler neck where it connects to hose.
Did a quick run around the shops like Enzed and truck parts places during lunch today, but nothing in that size.
Finally found some at local rubber place "Total Rubber". Got 0.5m for $30.
The sales guy said it was an odd size, and he was surprised they even had any on the shelf.
Hopefully it fits OK. Will post back how it goes.
SteveG
Check that it is fuel grade hose.
Erich.
Thanks Erich. Yes - definitely fuel grade. The manufacturers label on the piece it was cut from said "54mm Fuel Applications"
SteveG
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks