Reply With QuoteTry here:
Welcome to Nice Products!
But I would suspect that a decent wheel shop would have done so already (I hope).
Master
I'm hoping someone might know where I can purchase some wheel nuts to suit ROH alloy wheels. I'm only chasing 3 so that I can mount the spare. I spent today trying all sorts of car and wheel outlets on the Sunshine Coast trying to find some with no luck. British offroad has Land Rover alloy nuts but none to suit the ROH wheels.
The thread appears to be 16mm and the outside of the nut is a constant 24mm over the length of the nut. The attached picture is of the ROH wheel and nut.
OldBushie
Try here:
Welcome to Nice Products!
But I would suspect that a decent wheel shop would have done so already (I hope).
Scott
Swaggie
SubscriberScott, i went through the entire catalog and no listing for Land Rovers.Originally Posted by Scouse
So i would imagine you need to have the stud and nuts size and pitch to get a match to suit the Landy.
Baz.
Cheers Baz.
2011 Discovery 4 SE 2.7L
1990 Perentie FFR EX Aust Army
1967 Series IIa 109 (Farm Truck)
2007 BMW R1200GS
1979 BMW R80/7
1983 BMW R100TIC Ex ACT Police
1994 Yamaha XT225 Serow
SysAdmin (Owner)
there is a place in sydney that makes them.... hopefully i will remember their name
they do those plastic inline screw top radiator filters .... and his name is frank.... ummmmmmmmmmmmm
found it
http://www.aulro.com/afvb/technical-...or-filter.html
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
Swaggie
SubscriberOr the correct postthere is a place in sydney that makes them.... hopefully i will remember their name
they do those plastic inline screw top radiator filters .... and his name is frank.... ummmmmmmmmmmmm
found it
Product Review: Tefba Radiator Filter
Cheers Baz.
2011 Discovery 4 SE 2.7L
1990 Perentie FFR EX Aust Army
1967 Series IIa 109 (Farm Truck)
2007 BMW R1200GS
1979 BMW R80/7
1983 BMW R100TIC Ex ACT Police
1994 Yamaha XT225 Serow
ChatterBox
We used to dress up the D1's with these alloys (remove the steel wheels) as they "weren't " too bad a rim & reasonably priced. We bought many of these alloys from Bob Jane T-Mart. You could try these guys & let them chase the nuts for you.
Cheers
SysAdmin (Owner)
is the right post, he does the wheels nuts and studs as well...Or the correct post
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
Master
Thanks for the suggestions so far. The places I have been have all checked the Nice catalogue but as had been said Nice don't make nuts to suit Land Rovers. I also tried Bob Jane in Nambour as they deal with ROH. The bloke rang ROH and they said that they no longer make the nuts.
Another option I am looking at is getting some machined up. Can anyone tell me what the thread for a D1 is. I'm thinking it is 16mm metric but want to make sure it isn't 5/8th imperial.
Swaggie
SubscriberI can assure you that a D1 has metric thread. All land rover since Series 3? have strangely enough.
Regard sPhilip A
SysAdmin (Owner)
ring frank, he does em for a living and did up a full set for 5 wheels for me for under 200 bucks and they were custom sizes... no one else i tried was anywhere near as cheap..
Frank Tonitto: 122-124 Silverdale Rd, Silverdale NSW 2752
(02) 4773 3022
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks