Recovery points

**Grover-98** · 18th February 2009, 01:34 PM

Went shopping today picked up some speakers for the mac

, but more importantly i got some recovery hooks for $5 each

they were the last two in stock

Well after the excitement i came home and went to put them on the D1 but im not sure where to bolt them on to as i have a bull bar, do i need to use longer high tension bolts to put them on with the bull bar?

Any pics and superb descriptions welcomed

James.

**Grover-98** · 18th February 2009, 02:11 PM

...PLEASE

Was hoping to get it done today so if i need to go to bunnings i would like to know ASAP

**long stroke** · 18th February 2009, 03:02 PM

Need a pic of the hooks and the bar

**Psimpson7** · 18th February 2009, 03:04 PM

Picures would be good, but yes I would use decent rated bolts. grade 8.8 or above.

**Grover-98** · 18th February 2009, 05:06 PM

I don't know how to post pic on here but these are the hooks i have

http://www.4x4store.com.au/images/de...brtowhooks.jpg

And here are some photos of my bull bar.(i don't know if they will help)

MySpace.com - >>>Evans<<< MY RIDES

**long stroke** · 18th February 2009, 05:20 PM

You might beable to bolt them straight through the top of the bar

Might have to take the bar off though

Not shore how thick the steel is.

TIM.

**long stroke** · 18th February 2009, 06:43 PM

Here are the bar pics...

CHEERS TIM.

**loanrangie** · 18th February 2009, 08:15 PM

You need to bolt them as close as possible and inline with the chassis mounting brackets of the bar using hi tensile bolts/washers/spring washers and some nice thick 6-8mm pieces of plate to help spread any load over the mounting surfaces. Just under or over the rubber bumpers on the bar is usually where they are fitted.

Thread: Recovery points

Thread Tools

Recovery points

Bookmarks

Bookmarks

Posting Permissions