Thread: WHERE HAS MY FRONT STABILISER BAR GONE

Originally Posted by nice1guv

Zip down to the wreckers and pick one up for the front then.

Easy job to fit with a couple of spanners or socket.

yeah if you have the brackets on the axle

I have the same, or lack of in mine, I have a 2 inch HD lift with pretty crappy shocks, it is all over the road. Im suprised as mine is a 10/95, thought they would have all had front sway bars by then. So some decent shocks all round and it will handle much better? The rear on mine seems to want to kick out for some reason, if that makes sense. I thought the handling really had to do with the spring rates?

Originally Posted by Robos disco

I thought after i looked under the vehicle it was strange not to see a stabiliser bar when all the mounts are there to fit it.

Originally Posted by nice1guv

Zip down to the wreckers and pick one up for the front then.

Easy job to fit with a couple of spanners or socket.

Originally Posted by dullbird

yeah if you have the brackets on the axle

Doesn't he have the mounts/brackets?

Originally Posted by nice1guv

Doesn't he have the mounts/brackets?

I didn't see that post I was under the impression though that the early ones never even had the brakets... Unless the were fitted because the rangie bad the bars standard,,,, maybe????

Hi, good to see someone else in Sunbury onboard. I have a 1996 model if you need to have a look at how it is set up or have a test run to compare. I have a 2in lift and hd shocker and ride nice and flat around corners. PM me if you would like to compare or see how things are fitted.
Cheers, David.