Stereos for D2...Advice and Show em :-)

https://www.aulro.com/afvb/[/QUOTE]

Im going to make one of those.....but how is it attached and secured to the position of the bin???

Quote:

---

Originally Posted by msteen

They are 6.5" if my memory serves me correct. The tweeters are in same place the factory tweeters were (A pillar). My doors dont have place for the tweeters. If you could let me know where you are getting the leather trims from that would be great, they sound like a good idea.

---

Got mine on Ebay. I think Bundalane has a set listed at the moment. Let me know if you buy them. if you don't need the console i might take that off your hands.

Cheers

Matt

Quote:

---

Originally Posted by Hamish71

http://img535.imageshack.us/img535/2696/dscf1297.jpg

---

Im going to make one of those.....but how is it attached and secured to the position of the bin???[/QUOTE]


if you are going to get one made,,, have a think about storage underneath, even a 12" sub should give you room to make a small storage bin for heavy things like, shackles etc,

Quote:

---

Originally Posted by Hamish71

Im going to make one of those.....but how is it attached and secured to the position of the bin???

---

I recently pulled the sub out to see how it is constructed and mounted for someone else on this forum - can send you a few photos etc if you like, but probably easier in an e-mail.

Quote:

---

Originally Posted by Pedro_The_Swift

if you are going to get one made,,, have a think about storage underneath, even a 12" sub should give you room to make a small storage bin for heavy things like, shackles etc,

---

Definitely agree with this. One of the ideas I had when I recently pulled out the sub for a look was to see if there was room below it to mount a compressor. Unfortunately, the way that mine has been constructed, there isn't any room to do anything, but if you were starting a new one from scratch, you should be able to mount the sub a bit higher than mine is, and design a separate chamber beneath.

Quote:

---

Originally Posted by BMKal

I recently pulled the sub out to see how it is constructed and mounted for someone else on this forum - can send you a few photos etc if you like, but probably easier in an e-mail.



Definitely agree with this. One of the ideas I had when I recently pulled out the sub for a look was to see if there was room below it to mount a compressor. Unfortunately, the way that mine has been constructed, there isn't any room to do anything, but if you were starting a new one from scratch, you should be able to mount the sub a bit higher than mine is, and design a separate chamber beneath.

---

Actually, amount of room depends on whether you have drawers in the back or not :)