Thanks for that switch part No. I need one to replace a switch in one of my D2 key fobs
Are you talking about the D1 or D2 key fob?
Edit:- I see you posting in the D2 section so I assume your talking about the D2 key fob.
Just thought I'd share some joy I just had with my disco's key,
I ordered a replacement silicon pad off ebay, this works really well, problem being the 2 switchs on the electronic card were stuffed so I went down to jaycar electronics and found a suitable replacement switch Part number SP0611 I had to trim the terminals almost flush with the base of the new switch so I could solder it back in nicely and also had to trim the new silicon button part slightly otherwise it would have been constantly pressing the button but otherwise a very cheap and easy fix
Silicon pad $37
Replacement switches P/N SP0611 95c each
Hope this helps someone else
Cheers Tim
Thanks for that switch part No. I need one to replace a switch in one of my D2 key fobs
Are you talking about the D1 or D2 key fob?
Edit:- I see you posting in the D2 section so I assume your talking about the D2 key fob.
2024 RRS on the road
2011 D4 3.0 in the drive way
1999 D2 V8, in heaven
1984 RRC, in hell
Yep D2
From memory,there is a company in W.A. I think that sells replacement key pads.
There was a previous post on this site some months ago.
Try a search.
Trev.
For information, if your after the key pads the company is POLMEX and you can generally buy them cheaper directly ($33) than through their Ebay store.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks