Results 1 to 7 of 7

Thread: The wheel hub sensor connects to the...?

  1. 2nd May 2010, 03:12 PM #1
    Hamish71 Guest

    The wheel hub sensor connects to the...?

    Gents....and ladies....
    Quick back ground. I have the three amigoes, and have diagnosed it as the front right wheel hub sensor. I have bought the replacement part, being the wheel hub sensor with the long lead for direct connection to the ecu. I have fitted the sensor, run the cable....but now am stuck. I got some conflicting advice from Ritters.

    I was given a page from their online workshop manual, which shows connector no.C0655, being a 12 pin multiplug, and told to connect the leads to pin no.s 1 and 2. I was also told this plug was easy to identify because it had 4 green wires running into it. Easy....

    So, now im looking at the ecu, and plug c0655. C0655 is indeed a 12 pin multiplug, but it doesnt have 4 green wires running into it. There is a muliplug at the top, with 9 pins, which has 4 green wires running into it, and these wires "look like" the wires on the existing wheel hub harness.....but im not sure.

    Anyone with a suggestion, please?
    Reply With Quote Reply With Quote
  2. 2nd May 2010, 03:58 PM #2
    biggin
    biggin is offline Wizard Subscriber
    Join Date
    Feb 2009
    Location
    Newborough, VIC
    Posts
    1,540
    Total Downloaded
    67.72 MB
    According to RAVE, RH front connects to C0505-4 and C0505-5, both green wires. It's the nine pine plug on one end of the SLABS ECU. It has 4 green wires going to it.
    Reply With Quote Reply With Quote
  3. 2nd May 2010, 04:39 PM #3
    Urban Panzer's Avatar
    Urban Panzer
    Urban Panzer is offline Master
    Join Date
    Jul 2008
    Location
    UK
    Posts
    677
    Total Downloaded
    0
    It "should" be a Yellow connector at the SLABS, 4 green wires and 2 twisted "pairs"........ a piccy here ....

    Reply With Quote Reply With Quote
  4. 2nd May 2010, 05:23 PM #4
    Hamish71 Guest
    Quote Originally Posted by biggin View Post
    According to RAVE, RH front connects to C0505-4 and C0505-5, both green wires. It's the nine pine plug on one end of the SLABS ECU. It has 4 green wires going to it.

    I have RAVE, but couldnt find that....can you tell me how you found that, please?...and thanks, to both of you.
    Reply With Quote Reply With Quote
  5. 2nd May 2010, 05:34 PM #5
    biggin
    biggin is offline Wizard Subscriber
    Join Date
    Feb 2009
    Location
    Newborough, VIC
    Posts
    1,540
    Total Downloaded
    67.72 MB
    Quote Originally Posted by Hamish71 View Post
    I have RAVE, but couldnt find that....can you tell me how you found that, please?...and thanks, to both of you.
    Look in 'Electrical Circuit Diagrams', under 'Anti-lock braking system(ABS)', page 35.3 shows the sensors clearly, and the connections into the SLABS ECU.

    You can check connector details by looking in 'Electrical Library' in section 5.
    Reply With Quote Reply With Quote
  6. 2nd May 2010, 06:48 PM #6
    Hamish71 Guest
    if any of the Mods are watching, this information might be a useful sticky somewhere....
    Reply With Quote Reply With Quote
  7. 2nd May 2010, 07:01 PM #7
    Hamish71 Guest
    Quote Originally Posted by biggin View Post
    Look in 'Electrical Circuit Diagrams', under 'Anti-lock braking system(ABS)', page 35.3 shows the sensors clearly, and the connections into the SLABS ECU.

    You can check connector details by looking in 'Electrical Library' in section 5.
    Thanks again, I had a "man's" look the first time, didnt see that the diagram was labelled with the pin outs....thanks!
    Reply With Quote Reply With Quote
« long range automotive -long range tanks | Disco Died »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!