D2 Electric seats - Need your assistance

Tombie · 29th June 2010, 09:44 AM

Hi everyone... I need some help from someone with electric seats in their Discovery 2.

I have got my hands on a complete leather seat package and been busy installing in the vehicle.

Problem:
The front seats arrived with the wiring looms seperated from the seats...

I dont know where the wiring is supposed to mount, or the fuse block or relay...

Can somebody grab a camera and (bending like an Olympic gymnast) take some pics showing the locations of the wiring loom, fuse block, yellow relay block etc... under the front seats for me?

Would be greatly appreciated.

mattg · 29th June 2010, 10:21 AM

Hi Tombie.

Can't help yet but am working on this conversion as well. I have the seats, the drivers side switch and the plug on the seat end. If you could take some photos of the fitting process or a diagram of the loom that would be very helpfull.

I'm still looking for the Passenger side switch and loom. I might be able to make a loom but what else do I need?

Cheers

Matt

Tombie · 29th June 2010, 11:59 AM

No problems... I have the passenger side seat out at the moment waiting to fit the Leather version, will photograph for you.

**discowhite** · 29th June 2010, 01:59 PM

1.jpg

2.jpg

3.jpg

4.jpg

5.jpg

cheers phil

Tombie · 29th June 2010, 02:23 PM

Thanks Phil... Champion.... Now I know what I'm doing when I get home

**Pedro_The_Swift** · 29th June 2010, 03:05 PM

I KNEW Phil would know,,,

**Urban Panzer** · 3rd July 2010, 09:14 AM

Dont forget if the vehicle never came with electric seats from the factory, it will need enabling in the BCU options before they work.

mattg · 7th July 2010, 06:51 AM

Originally Posted by Urban Panzer

Dont forget if the vehicle never came with electric seats from the factory, it will need enabling in the BCU options before they work.

Is this a nanocom job or dealer / Auto Logic Job?

Matt

**discowhite** · 7th July 2010, 07:30 AM

Originally Posted by mattg

Is this a nanocom job or dealer / Auto Logic Job?

Matt

nanocom

cheers phil

mattg · 1st August 2010, 04:16 PM

Originally Posted by Tombie2

Thanks Phil... Champion.... Now I know what I'm doing when I get home

Hey Tombie, How did you go with your seats? I still need to find One switch and the loom. I am thinking about converting my manual seats to Leather as I would rather a leather Forward and Back side anyway. Has anyone done This?

Looking at the leather one I think it would mean I need to Strip the leather and fit it onto the manual seat. but then there it the arm rests as well as the manual Lumbar support.

Any thoughts out there?

Cheers

Matt

Thread: D2 Electric seats - Need your assistance

Thread Tools

D2 Electric seats - Need your assistance

Bookmarks

Bookmarks

Posting Permissions