Thread: D2 Electric seats - Need your assistance

Tombie - did you ever complete this?

Has anyone else done it?

I can get some...with harness and switch gear, but need to know it will work in a base model 2001 build.

Cheers

Originally Posted by ozscott

Tombie - did you ever complete this?

Has anyone else done it?

I can get some...with harness and switch gear, but need to know it will work in a base model 2001 build.

Cheers

Sure did, up and running about 3 days later...

Work with any model... Just remember you'll need to tell the vehicle it has electric seats or they wont work.

Many thanks mate - I take it it is plug and play? Are the buttons all on the seat or are some on the centre console/dash?

Cheers

PS. Is the fore and aft adjustment of the whole seat electric or is that still pulling a bar and moving?

All on the centre console (holes need to be cut)

The rest is plug and play - Nanocom needed to turn seats on.

OK! Pushed the button on a set of black front leather electrics - a vehicle that had only done 15000k (fifteen thou) and black with walnut leather wheel from the same vehicle - centre console complete along with black lower seat trims to suit! Very nice.

Cheers

Nice.... Fitting is easy... Just take your time

Thanks mate. I think the only problem might be that the console is out of an auto - mines manual. So I might have to widen the black consoles hole - that's easy but the auto hole will be too long...perhaps I can cut some of the old console plastic out and and rivet it in using tin or similar to fill....once the old black rubber is back on it will all look stock.

Cheers

Yes - Fitting a plate will solve your issue I'd agree.

Auto
Attachment 73774

Manual
Attachment 73775