Printable View
Scouse
I do have the orignal remote which works but I'm chasing a second one as I only have one key.
I did purchase CWE100680KIT but would not program to the car. This key is now in transit back to the UK to be replaced with either a 690 or 700.
The other options from Biggin look interesting. I'll give them crack when the new remote arrive.
Regards
Andrew
I am sending my new fob back to TRS in Adelaide and they will try to find one that has the same frequency from my vin # SALL TGM 971A732 331.
In the mean time the guys at Rova Craft have fixed my old fob with a new switch (unlock) soldered in place and a new plastic insert. I got my other old fob out of the safe and placed a wire across the circuit board and bingo it works l so I will get it repaired as well.
I will soon have 3 key fobs and no money :(
Mike
I'll be interested to see how this one works out. I've had two new keys now that were supposed to be the correct frequency, and neither could be programmed to the D2a. Both failed the rf test using a nanocom, while my current keys pass the same rf test ... ?
fwiw ... when I tried coding the keys, the originals show a code on the nanocom consisting of alpha/numerical entries, the two unsuccesful keys showed only numerical values ...
Both were returned.
Just tried the key from Rova Craft that was repaired. Does not work damn then I tried the key itself wrong key?????? they apear to have given me some one elses key and fob :mad: .I looked in the little packet the name Spencer is inside not my name. Mr Spencer I have your key and you probably have mine. The key saga seems it will ever end my neighbours will soon sell up and move away at this rate.
Mike,Not Spencer