Thread: 3 amigos - Melbourne

if your not interested in having a go at fixing it yourself i would suggest you give roverland in boronia a visit, glenn fixed mine (mine was the shuttle valve) quickly and for a reasonable price, and with warantee as well

Hi Mate,
where in melb are you? I might be able to help clear and read your fault codes, I have just cleared my 3 amigos and so far so good, my fault was low output on rear right sensor, I will continue to monitor as this fault occurred 12 months ago. PM me if interested
Cheers Matt

Guys,

If you haven't already done so, can I suggest using the LR tech bulletin LTB 00060 to assist in isolating where the fault may be, if the diagnostics are indicating a shuttle valve problem.

While shuttle valve fail, I went through the bulletin and checked the earth. In all of the wet weather that Brisbane has been having, I was getting 3 amigoes all of the time - nearly every drive, randomly coming on. It didn't occur once the weather came good (touch wood), and when I finally checked using the LTB the earth had some corrosion on it and it wasn't 100%. Cleaned it and put some electrical contact lube on it to assist in stopping corrosion. Time will tell, but no faults have occurred since rectifying the corroded earth. (There are 2 in front of the air cleaner box, need to unscrew them a fair distance to check for corrosion. Simply untightening them and retightening isn't good enough - scrape or sand the corrosion off. )