Thread: urgent help needed broken in camoweal

Lewy, just spoke to Dale who filled me in. Not much knowledge of the V8, but if the immobiliser is activated the alarm will trigger and light on dash should flash when you try to turn key to start.

The Lock/Unlock with the fob, using EKA or a Nanocom/Rovacom or similar will reset the immobiliser. Disconnecting the battery for several minutes will let everything power down and reset but the BCU/ECM will stay in an immobilised state if it has been triggered. That said as the alarm doesn't sound I'd look elsewhere first

From what you've posted and told Dale it sounds to me like it might be a heat or wiring problem so the inertia switch, relays, fuses etc would be first thing to look at.

looks like she is on the back of a truck to darwin,will let everyone know what the problem is when fixed,possible crank angle sensor.now 30 odd hrs in camoweel,hmmmmm

Originally Posted by lewy

looks like she is on the back of a truck to darwin,will let everyone know what the problem is when fixed,possible crank angle sensor.now 30 odd hrs in camoweel,hmmmmm

Bugger X 2!

Catch up on sleep - may not get much on the bus.

Hope you get home soon. Not a good feeling seeing the Disco go off on the back of a truck

And the winner is,crank angle sensor,Thanks to all those who helped,particulary tony ireland land rover townsville Who explained over the phone on a weekend how to enter the eka code.Bundalene who was on the mobile somewere near tilpa,moral to the story,Don't turn it off at avon downs on the barkly.