Who owns a ph 4 screwdriver?

Quote:

---

Originally Posted by Ean Austral

Just replace them will hex style when you replace the rotors, never have the problem again.


Cheers Ean

---

Thanks, that is just what I would like to do for either myself or the next poor bugger that wants to change the rotors. I phoned MR automotive who are putting some standard ones in the post for me. Do you remember the thread pitch and diameter and length to see if the local bolt barn can help me with hex head replacements. Otherwise I will just do as UP suggests and cover them in copper slippery stuff.

Quote:

---

Originally Posted by Blknight.aus

they aint phillips, thems posidrive.

p4 wont fit...

---

Thanks, you may have saved me more anguish. I did not see the little nicks for a posidrive but they are full of crud and now stuffed anyway but I will see if I can get my hands on a size 4 posi to put the new ones in.

Quote:

---

Originally Posted by John W

Thanks, that is just what I would like to do for either myself or the next poor bugger that wants to change the rotors. I phoned MR automotive who are putting some standard ones in the post for me. Do you remember the thread pitch and diameter and length to see if the local bolt barn can help me with hex head replacements. Otherwise I will just do as UP suggests and cover them in copper slippery stuff.

---

I cant remember, but I managed to get 1 of the 4 out when I did mine on the D2 ( when I had it ) and it was a standard pitch and thread and about 20mm. I took the 1 with me and came home with 4 hex style and job done.

Cheers Ean

and as UP says,
just put the disk back on without the silly screws,,
there are 5 perfectly fine oversized wheel nuts to ensure it wont fall off anytime soon--;):D