Thread: Td5 idler pulleys. Are they all the same ?.

You're on the right track bloke - the descriptor you should take note of is whether your Disco has ACE or is non ACE as the belt length is different.

Only you will know whether your vehicle has A/C...and to be honest, I really don't know of any TD5 Disco not having air conditioning

Anyhow - try this link. Great guy to deal with by the way

Land Rover Discovery 2 TD5 Genuine Tensioner & Belt Kit | eBay

Originally Posted by Catmatt

You're on the right track bloke - the descriptor you should take note of is whether your Disco has ACE or is non ACE as the belt length is different.

Only you will know whether your vehicle has A/C...and to be honest, I really don't know of any TD5 Disco not having air conditioning

Anyhow - try this link. Great guy to deal with by the way

Land Rover Discovery 2 TD5 Genuine Tensioner & Belt Kit | eBay

thats not the part being referred to, Stuck is after the idler pulley bracket and pulley which is just under the a/c pulley.
i have one here i borrowed whilst waiting for a new one to arrive, will ask the owner if willing to sell it on if you want?.

Originally Posted by Yorkie

thats not the part being referred to, Stuck is after the idler pulley bracket and pulley which is just under the a/c pulley.
i have one here i borrowed whilst waiting for a new one to arrive, will ask the owner if willing to sell it on if you want?.

That would be the bracket with 3 bolts that fitts where the ACE pump would be.
They are only on non ACE rigs and use the shorter belt as mentioned.

Be carefull when ordering it,
I orderd the complete assey only to receive the pulley and bolt only.
Rang a different suplier and the full assey turned up(I now have spare pulley in the kit).

Also it's located on 2 hollow dowels, one of mine went with my old one when I lent it to never see it again.
I ended up using a brass airline olive I had in the shed(due to time constraints).

I've just checked my parts boxes.

ERR 6658 Pulley and bolt only.

ERR 6949 Complete asey.

Hope that helps and doesn't confuse things further.

Originally Posted by alien d2

I've just checked my parts boxes.

ERR 6658 Pulley and bolt only.
LRO 16319 Complete assey ( A hand writen note says it includes MSX000010 and ERR6761)

Hope that helps and doesn't confuse things further.

Interesting...

ERR 6761 is a TD5 Injector Oring..
MSX000010 is Fuel Regulator Gasket
LRO 16319 is the Fuel Regulator for early TD5

ERR6658 is Pulley, Cap and Bolt:

Originally Posted by Tombie

Interesting...

ERR 6761 is a TD5 Injector Oring..
MSX000010 is Fuel Regulator Gasket
LRO 16319 is the Fuel Regulator for early TD5

ERR6658 is Pulley, Cap and Bolt:

Um, Er ,,,wrong box

Try...ERR 6949
(Edited origional post)

Do you need to replace the pulley or just the bearing??.

Just knock the bearing out with a a hammer and take it to a bearing shop, they have plenty that are the same quality, some better,, and knock a new one back in, save yourself some cash,, if so!!.

BIG O
03 D2 TD5 AUTO
99 D2 TD5 AUTO ACE
94 D1 TDI 3 DOOR (GONE)

I have had one of these bearings go in this pulley.
Was able to get a bearing from local parts supplier for $10.00
Bearing is HCH V203 6303-2RS
Was an easy knock out, press in job.

Greg