Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: Can anyone help me do Option B?

  1. #11
    Join Date
    Mar 2010
    Location
    Sydney
    Posts
    1,033
    Total Downloaded
    0
    Quote Originally Posted by Franz View Post
    I do now occasionally get 2.5 amigos.
    I have also experienced this. About twice. Completed Option B some time ago. Also inclined to believe brake squeal is the cause but not sure.

    Regards
    Andrew

  2. #12
    d@rk51d3 Guest
    Quote Originally Posted by strangy
    Not being picky but technically incorrect for the uninitiated to follow.
    The mod does not bypass the poor joint inside the SLABS Ecu.
    The SLABS ecu is located inside in the pax foot well.
    Oooooops.

    Thanks for the correction.

  3. #13
    Join Date
    Jan 1970
    Location
    Ringwood, Vic
    Posts
    2,127
    Total Downloaded
    0
    Thanks for the responses and offers of help. I'm going to have access to a Nanocom on the weekend so will ascertain the fault then decide what to do...... one of you may still receive a pm early next week
    D4 SDV6, a blank canvas

  4. #14
    Join Date
    Mar 2009
    Location
    Port Stephens N.S.W
    Posts
    3,161
    Total Downloaded
    0
    Quote Originally Posted by Franz View Post
    ..................I do now occasionally get 2.5 amigos.

    The 2.5 amigos are made up of the ABS, HDC and handbrake light - yes, the handbrake light! I've had this happen about 3 times now and the lights are cleared by switching off the ignition and restarting the vehicle. No faults are logged in the SLABS. I put this down to brake squeal and it normally happens just after starting out and the first stop at traffic lights.

    Anybody else seen this happen?
    G'day Franz.

    Yep ... thems my Amigos. Never a SLABS fault when checked with the Nanocom ... clears with a stop/start ....

    Always accompianied by brake squeal.

    Used to read as a wheel speed sensor fault in earlier days ... but the faulty sensor progressivley moved from one wheel to another, then another, then another .... and now is almost aways no fault logged ...

    Nusciance value.
    Kev..

    2014 Isuzu MUX LST with fruit
    2008 Isuzu D-Max
    2015 Kimberley Kamper "Classic"

    Gone ... 2004 D2a Td5 Auto "Classic Country" Vienna Green

  5. #15
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,037
    Total Downloaded
    0
    whats your address?
    I'll send you some redheads--
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  6. #16
    Join Date
    Mar 2009
    Location
    Port Stephens N.S.W
    Posts
    3,161
    Total Downloaded
    0
    Not quite that desperate yet ...
    Kev..

    2014 Isuzu MUX LST with fruit
    2008 Isuzu D-Max
    2015 Kimberley Kamper "Classic"

    Gone ... 2004 D2a Td5 Auto "Classic Country" Vienna Green

  7. #17
    Join Date
    Jan 1970
    Location
    Ringwood, Vic
    Posts
    2,127
    Total Downloaded
    0
    All Done!
    Huge thanks to Alpick who was staying nearby whilst down from Sydney. First established the intermittent fault then did Option B... took the modulator out to do it. I've triggered ABS and HDC and all is good.Only problem I have now is a flickering Handbrake light??? might be wet as I sloshed some soapy water around to wash off the spilt brake fluid. Hopefully it'll be ok tomorrow.
    Thanks to all who offered to assist.
    D4 SDV6, a blank canvas

  8. #18
    Join Date
    Nov 2010
    Location
    Perth
    Posts
    202
    Total Downloaded
    0
    I had the Flickering brake light, Drove me nuts then checked the brake fluid topped it up and its gone away, not sure if that helps

  9. #19
    d@rk51d3 Guest
    Great news!
    Glad you got it fixed. It's a good feeling, isn't it?

  10. #20
    Join Date
    Apr 2009
    Location
    Coogee NSW
    Posts
    545
    Total Downloaded
    0
    Hey Wardy1

    Glad I could help out, pity there wasn't time for a coldy at the end of the day ( you did top up the brake fluid didn't you Al).

    Cheers
    Al

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!