Results 1 to 8 of 8

Thread: Dead TD5 - no electrical power

  1. #1
    Join Date
    Feb 2011
    Location
    Hobart, Tasmania, Australia
    Posts
    3,828
    Total Downloaded
    0

    Question Dead TD5 - no electrical power

    I'm currently away in Queensland with work. Before leaving I parked my TD5 Disco at my parents house a few weeks ago. My old man rang me up last night as the vehicle is dead when he tried to move it out of the way (it hasn't been touched since the 11 November).

    There seems to be no electrical power (interior light isn't working, remote locking not working etc.). It's equipped with a dual battery setup with the capability to jump start itself. I had him switch that over and there was still no electrical life to the vehicle - so I'm assuming it's not the batteries at fault, but rather something between them and the vehicle, i.e. fuse, relay, etc.

    The vehicle is parked on a slope. I had him check the inertia switch sensor thing on the passenger side firewall, as I've had that previous stop the vehicle from starting, but that had no effect.

    Is there any easy to check common faults or points that suit the above description?

  2. #2
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,517
    Total Downloaded
    0
    double check the voltage on the primary battery, some dual battery setups need enough juice in the primary battery to turn the system over to its emergency power settings.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  3. #3
    Join Date
    May 2009
    Location
    Ballan
    Posts
    327
    Total Downloaded
    0
    I would be checking battery voltage like blknight said, i recently had my main battery die and when i went to use 2nd battery to jump start it did not have enough power (my second battery might be suspect as well).
    Cheers

  4. #4
    Join Date
    Feb 2011
    Location
    Hobart, Tasmania, Australia
    Posts
    3,828
    Total Downloaded
    0
    Yes, the second battery may not have enough enough juice to have jump start her, and turn the engine over, but would likely have enough to power the interior lights at least, which still remained dead. It's also a near new Optima Yellow top battery as the second one. The red LED on the dual battery controller illuminated when it was flicked over to jump start, so there was 12v in the second battery at least.

  5. #5
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,517
    Total Downloaded
    0
    usually tho there is a pull in solenoid that connects the second battery to the first one..

    if the pull in solenoid is drawing its power from the primary battery and its so flat as to not be able to pull the solenoid then your internal jump start wont happen,
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  6. #6
    Join Date
    Feb 2011
    Location
    Hobart, Tasmania, Australia
    Posts
    3,828
    Total Downloaded
    0
    Just got home. You are correct, flat primary battery. Sitting at 2V. So that is disappointing for a number of reasons - 1. the jump start feature on the dual battery controller is fairly useless, 2. I'm probably up for a new battery now as this one has been sitting at a low voltage for a few days and 3. I need to figure out what sent it flat!

  7. #7
    Join Date
    Apr 2007
    Location
    Tassie
    Posts
    171
    Total Downloaded
    0
    Quote Originally Posted by twr7cx View Post
    Just got home. You are correct, flat primary battery. Sitting at 2V. So that is disappointing for a number of reasons - 1. the jump start feature on the dual battery controller is fairly useless, 2. I'm probably up for a new battery now as this one has been sitting at a low voltage for a few days and 3. I need to figure out what sent it flat!
    This may help with 3
    http://www.aulro.com/afvb/discovery-...ery-drain.html
    Cheers Peter

  8. #8
    Join Date
    May 2009
    Location
    Ballan
    Posts
    327
    Total Downloaded
    0
    I would have thought your battery would be covered by Optima's warranty, these batteries are designed to be drained quite heavily and still recover multiple times.
    Cheers Matt

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!